My WebLink
|
Help
|
About
|
Sign Out
Home
Browse
Search
Opening of Bids - One (1) or More, 2020 or Newer, Emergency Medical Vehicle – Spec P - Fire Service, Inc.
sbend
>
Public
>
Public Works
>
Board of Works Documents
>
2020
>
Opening of Bids
>
Opening of Bids - One (1) or More, 2020 or Newer, Emergency Medical Vehicle – Spec P - Fire Service, Inc.
Metadata
Thumbnails
Annotations
Entry Properties
Last modified
4/9/2025 1:50:02 PM
Creation date
11/12/2020 11:15:58 AM
Metadata
Fields
Template:
Board of Public Works
Document Type
Contracts
Document Date
11/10/2020
Jump to thumbnail
< previous set
next set >
There are no annotations on this page.
Document management portal powered by Laserfiche WebLink 9 © 1998-2015
Laserfiche.
All rights reserved.
/
214
PDF
Print
Pages to print
Enter page numbers and/or page ranges separated by commas. For example, 1,3,5-12.
After downloading, print the document using a PDF reader (e.g. Adobe Reader).
Show annotations
View images
View plain text
City of South Bend Central Services Division <br />Fire Service, Inc./Wheeled Coach Ambulance <br />Specification <br />stripper and accompanying layout drawings. <br />RIGHT FRONT CABINET DOORS <br />The right front cabinet shall not have any doors. The opening shall be trimmed <br />with an aluminum extrusion. <br />SQUAD BENCH CABINET <br />The squad bench cabinet shall be located on the curb side of the patient <br />compartment over the rear wheel well. The squad bench shall be a minimum of <br />72 inches long and be constructed of three quarter inch birch. The lid shall be <br />attached to the squad bench assembly via a stainless steel piano hinge the entire <br />length of the bench. The hinge shall attach with fasteners in a vertical position <br />through the face of the lid and not through the edge of the cabinet and lid. The <br />squad bench shall be equipped with a locking device to automatically secure the <br />lid upon closing. The squad bench shall be furnished with two sets of 6 Point <br />safety belts for seated occupants and three Two point belts for the retention of a <br />cot when positioned on the squad bench. The anchorages for the side facing seat <br />belt assembly shall withstand a minimum of 2,500 pounds force when tested in <br />accordance with FMVSS 210-S5.1. A full length cushion shall be installed on <br />the squad bench lid and on the wall as a back rest. The interior of the squad bench <br />shall provide storage. <br />Squad bench- drawer at head for sharps/waste. ILO flip up lid for S/W <br />SQUAD BENCH LID <br />The squad bench shall have a full length lid that shall be manufactured from three <br />quarter inch birch. The lid shall be covered in color coordinating high pressure <br />laminate. <br />SQUAD BENCH LATCH <br />10070-0003 11 /05/20 <br />51 <br />
The URL can be used to link to this page
Your browser does not support the video tag.