Laserfiche WebLink
City of South Bend Central Services Division <br />Fire Service, Inc./Wheeled Coach Ambulance <br />Specification <br />An EVS brand box style steel seat base shall be provided for the rear facing <br />attendant's seat. The assembly shall be bolted to the floor through mounting plates <br />welded into the floor structural tubing. <br />UPHOLSTERY <br />The finish of the entire patient's compartment, including storage cabinets and <br />equipment, shall be impervious to soap and water, disinfectants, bio fluids, <br />mildew and shall be fire resistant per FMVSS 302. Upholstered cushions shall be <br />a minimum of thirty two ounce nylon reinforced commercial vinyl material. <br />Squad bench cushions and attendant seat and backrest cushions shall be <br />fabricated in such a manner to eliminate exposed welting. Cushions with welting <br />or beaded seams shall not be accepted due to the risk of bio fluid penetration. <br />CUSHIONS <br />On the squad bench wall and the CPR side seat wall (if called for) will be <br />individual backrest cushions in gunmetal gray to match the upholstery. These <br />cushions will be seamless with the ambulance manufacturers logo. <br />BULKHEAD CABINET <br />A bulkhead cabinet shall separate the cab from the patient compartment with a <br />sliding door to allow access between the two while providing privacy. The open <br />door shall allow for an aisle of at least 17 inches between the compartments. The <br />door shall have at least a 150 square inch transparent, shatterproof viewing panel <br />in the center section at the driver's eye level. The door shall be secured with a <br />driver's side self -latching device in the open and closed positions. <br />INTERIOR OXYGEN VIEWING DOOR <br />Cabinet, RF, Combo, EMS MAV, Custom will be provided as described in the response build <br />10070-0003 11 /05/20 <br />50 <br />