Opening of Bids - Seitz Park Reconstruction Phase I Proj No. 117-093A - Northern Indiana Construction Co., Inc.

Home Browse Search

exterior surfaces. Lap style and roll -up doors will be Clear Coated to match the body. Paint warranty for the roll -up doors will be provided by the roll -up door manufacture. Each batch of basecoat color is checked for a proper match before painting of the cab and the body After the cab and body are painted, the color is verified again to make sure that it matches the color standard. Electronic color measuring equipment is used to compare the color sample to the color standard entered into the computer. Color specifications are used to determine the color match. A Delta E reading is used to determine a good color match within each family color. All removable items such as brackets, compartment doors, door hinges, and trim will be removed and ropparately if required, to ensure paint behind all mounted items. Body assemblies that cannot be finish painted after assembly will be finish painted before assembly. Pierce Manufacturing paint finish quality levels for critical areas of the apparatus (cab front and sides, body sides and doors, and boom lettering panels) meet or exceed the Cadillac/General Motors GMW15777 global paint requirements. Orange peel levels meet or exceed the #6 A.C.T.standard in critical areas. These requirements are met in order for the exterior paint finish to be considered acceptable. The Pierce Manufacturing written paint standards will be available upon request. The cab will be two-tone, with the upper section painted #10 white along with a shield design on the cab face and lower section of the cab and body painted #50 red. PAINT - ENVIRONMENTAL IMPACT Contractor will meet or exceed all current State regulations concerning paint operations. Pollution control will include measures to protect the atmosphere, water and soil. Controls will include the following conditions: • Topcoats and primers will be chrome and lead free. • Metal treatment chemicals will be chrome free. The wastewater generated in the metal treatment process will be treated on -site to remove any other heavy metals. • Particulate emission collection from sanding operations will have a 99.99% efficiency factor. • Particulate emissions from painting operations will be collected by a dry filter or water wash process. If the dry filter is used, it will have an efficiency rating of 98.00%. Water wash systems will be 99.97% efficient • Water from water wash booths will be reused. Solids will be removed on a continual basis to keep the water clean. • Paint wastes are disposed of in an environmentally safe manner. • Empty metal paint containers will be to recover the metal. • Solvents used in clean-up operations will be recycled on -site or sent off -site for distillation and returned for reuse. Additionally, the finished apparatus will not be manufactured with or contain products that have ozone depleting substances. Contractor will, upon demand, present evidence that the manufacturing facility meets the above conditions and that it is in compliance with his State EPA rules and regulations. 80 of 89