Laserfiche WebLink
impervious to moisture, easily cleaned, durable, and attractive. The middle portion <br />shall be stainless steel and removable for ease of maintenance. <br />Y N_____ <br />6.22.1 Each rear patient entrance door shall have a 1.5" diameter polished stainless <br />steel 90 degree ergonomic style assist handle. <br />Y-.t,A_ <br />6,23 REAR BODY CLOCK <br />One (1) MFS-121 Digital Atomic Clock (or equal) shall be provided directly above the <br />rear patient entrance doors, recessed into the center of the rear head pad. It shall <br />be wired directly to the vehicle electrical system. <br />Y.,I,/N_ <br />6.24 SLIDING WINDOW <br />The entry/egress door shall be provided with a Cleer Vision Brand 20" wide x 19" <br />high horizontally sliding window. It shall have tempered automotive privacy safety <br />glass and shall have a locking mechanism to keep the window panels in the desired <br />position. A screen shall be provided, to prevent airborne particles from entering the <br />vehicle, when the window panels are in the open position. Y ✓N <br />6.25 FIXED WINDOWS <br />The rear patient entry doors shall each be provided with a Cleer Vision Brand 20" <br />wide x 19" high fixed window panel. Each window shall have tempered automotive <br />privacy safety glass. <br />Y,/N <br />6.26 SIDE BODY WINDOW <br />A fixed, privacy automotive glass window shall be provided a Cleer Vision Brand in <br />the right body side, above the rear wheel well in the upper body side. It shall be <br />approximately 36" wide x 18" high. <br />Y-X_ <br />6.27 POCKET WHITEBOARD <br />A pocketed privacy slide shall be provided on the curbside wall. It shall be <br />incorporated into the side body window and shall slide into the wall rearward of the <br />window. When in use, the writing board shall cover the window. There will be a pad <br />covering the rear end of the privacy slide frame that the writing board will slide <br />behind. <br />Y ✓N <br />7.0 EXTERIOR COMPARTMENT FABRICATION <br />All exterior compartments, excluding backboard compartments, shall be constructed <br />of .100" aluminum diamond plate walls and ceilings with .125" smooth aluminum <br />floors, formed and Heliarc welded. Exterior compartments are welded to both the <br />inside wall vertical structure and floor structure components for strength and <br />durability. Each floor shall be "sweep out" design. <br />Y /N <br />7.0.1 All exterior compartment doors shall be equipped with a gas charged hold open <br />door check. <br />Y N <br />