Laserfiche WebLink
up Plexiglas doors with non -locking catches for easy access. / <br />6.19 STEPWEI_I_ LIGHT <br />Two (2) LED lights shall be provided for the curb side step well. The lights shall be <br />mounted on an angled bracket one (1) over each step and shall activate with the <br />opening of the side entry door. / <br />Y VN <br />6.19,1 The side entry/egress entrance door shall have a 1.5" diameter polished <br />stainless steel 90 degree ergonomic style assist handle. <br />— <br />Y <br />6.20 REAR OF WHEELWELL — P5 <br />A full height compartment (P5) shall be provided in the rearward area behind the rear <br />wheel well. It shall have the approximate dimensions as follows: <br />21" wide x 84" high <br />Y_1A _ <br />6.20.1 The P5 compartment shall have a solid, flush mounted, vertically hinged door, <br />constructed of aluminum. <br />Y_Jej� <br />6.21 REAR PATIENT ENTRY DOORS <br />Each patient entrance door shall be constructed of .125" aluminum sheet box formed <br />with a double return bend of 2.75" total thickness. Extruded doors and/or <br />doorframes are not acceptable. Each door shall have the seal installed on the outer <br />door pan flange to assure maximum sealing surface and to protect the rotary latching <br />mechanism from environmental influences. The inner door pan liner shall be affixed <br />to the flange with stainless steel serrated spring washers and TX-25 Type F Torx- <br />head machine screws. In addition, "C" channel bracing shall be added internally for <br />additional door structural integrity. <br />Both rear patient entrance doors shall have an FMVSS 206 tested Tri-Mark locking <br />handles keyed alike to the side entrance door and a Tri-Mark non -locking handle. <br />Each rear door shall have a two -point rotary latch with adjustable .50" Nader pins <br />with head flanges at the top and bottom with release handles on the interior faces of <br />the doors. When opened, the rear doors shall provide an opening of at least 63" <br />high and 54" wide. Each rear door shall be equipped with a Cast Products "grabber" <br />style door check, which shall be located at the bottom of the door. When opened, <br />the rear doors shall activate the interior dome lights and the rear exterior load lights. <br />Each access door is to be stamped with an alphanumeric code; this will enable the <br />quick and exact replacement of a damaged door. <br />6.22 DOOR TRIM <br />Y_VX_ <br />The door shall have a .090" aluminum panel covering the upper and lower door and <br />full width door panel with .028" Formica, with color to match interior and shall be <br />39 <br />