Laserfiche WebLink
6.14.7 RIGHT SIDE COMPARTMENTATION <br />There shall be no P1 or ALS exterior compartment door provided. Access for the <br />AILS cabinet shall be from the interior only. <br />6.15 SIDE ENTRY DOOR <br />The entry/egress door shall be constructed of .125" aluminum sheet box formed with <br />a 1-7/8" return bend supporting the .090" 3003 alloy aluminum diamond plate inner <br />liner. Extruded doors and/or doorframes are not acceptable. In addition, for <br />maximum rigidity, 1-1/2" "C" channel bracing shall be added internally for additional <br />door structural integrity. <br />The door shall have a FMVSS approved Tri-Mark rotary latch with a Tri-Mark locking <br />handle and shall have a two -point rotary latch with adjustable Nader pins located on <br />the side of the door. It shall also be equipped with a spring assisted two -directional <br />cam -over door check. The door shall provide a clear opening of at least 32" wide <br />and 74" high. When opened, the door shall activate the interior dome lights. Each <br />access door is to be stamped with an alphanumeric code, this will enable the exact <br />replacement of a damaged door. <br />6,16 STEPWELL <br />The patient compartment access door shall have a full aluminum diamond plate step <br />well. The step well must have a full 18"deep step which allows for easy entry and <br />egress, a 9" high riser and be 32" wide to match the width of the side entry patient <br />compartment door. The step well shall be formed entirely from fire grade aluminum <br />diamond plate which is fully seam -welded into the body at the step well area. <br />6,17 SIDE ENTRY DOOR STEP <br />Y_ZN _ <br />YZ <br />A double step shall be constructed of aluminum diamond plate and shall be reinforced. <br />It will be at least 32" wide and shall allow easy entry and egress. <br />Y_ZN_ <br />618 DOOR TRIM <br />The door shall have a .090" aluminum panel covering the upper and lower door and <br />full width door panel with .028" Formica, with color to match interior and shall be <br />impervious to moisture, easily cleaned, durable, and attractive. The middle and <br />lower portion shall be stainless steel and removable for ease of maintenance. <br />6,18.1 GLOVEBOx <br />Y ✓N <br />Three (3) glove boxes shall be provided directly above the side entry/egress door. It <br />shall have approximate dimensions of 20" wide x 9" high and shall have three (3) flip- <br />38 <br />