Software Agreement - Network Solutions Incorporated - Expand Wi-Fi to Western Avenue

Home Browse Search

Network -Wide • NSI will conduct an Installation Review meeting and verify the Project Plan including network design, equipment delivery, installation times, and testing procedures. Switching • NSI will assemble the new equipment including installation of rackmount hardware, modules, and power supplies and install the devices in the existing equipment racks. • NSI will configure the new switches according to the agreed upon design and cutover from the existing equipment. The new equipment will take over handling production traffic. Wireless • NSI will install and document the location of each access point by room number, name, and AP MAC address. (3rd Party Contractor) • CoSB will provide lift access if required for high AP cabling or Installation (if applicable) • NSI will configure hostnames for each AP based upon their location. • NSI will reconfigure the switching infrastructure with new VLANs for new wireless SSIDs (up to 4) on the switching infrastructure. Further configuration of switches is outside the scope of this project unless explicitly specified in other sections of this scope of work. • CoSB will provide ©HCP services for any new networks that are created. Testing Responsibilities: Network -Wide • NSI and CoSB will test access to the critical services identified in the testing plan. Switching NSI will verify proper operation of the installed equipment as identified in the testing plan. At the completion of testing all devices should be capable of passing traffic through their uplink port, being remotely managed, and have had a backup copy of their configuration taken. Wireless • NSI will verify proper operation of the installed equipment as identified in the testing plan. • NSI will adjust wireless signal settings to best provide coverage and service to wireless users. Access points may need to be relocated to achieve optimal coverage. NSI will determine if a change order is required for additional services associated with relocation of access points. Training & Support Responsibilities: Network -Wide • No training is included as part of this proposal Final Deliverables Following the completion of this project, NSI and CoSB will review the work completed. As part of this review NSI will provide the following: Network -Wide NSI will provide documentation of the testing results including identified critical services, initial testing result, any required corrective actions, and final testing results (where necessary). NSI will provide documentation that identifies all products installed, their serial number, and the corresponding location/building they were installed in. Switching • NSI will provide network design documentation On digital format) of o A network drawing containing the devices installed www.nsil.com WHY we do is as important as WHAT we do (574) 271-0900