Laserfiche WebLink
Pass 5303.5.2-Physical protection <br /> Compressed gas containers.cylinders,tanks and systems <br /> which could be exposed to physical damage shall be <br /> protected.Guard posts or other approved means shall be <br /> provided to protect compressed gas containers.cylinders. <br /> tanks and systems indoors and outdoors from vehicular <br /> damage and shall comply with Section 312. <br /> Pass 5303.5.3-Securing compressed gas containers,cylinders <br /> (�) and tanks <br /> Compressed gas containers.cylinders and tanks shall be <br /> secured to prevent falling caused by contact-vibration or <br /> seismic activity.Securing of compressed gas containers. <br /> cylinders and tanks shall be by one of the following methods: <br /> 1.Securing containers.cylinders and tanks to a fixed object <br /> with one or more restraints.2.Securing containers,cylinders <br /> and tanks on a cart or other mobile device designed for the <br /> movement of compressed gas containers.cylinders or tanks. <br /> 3.Nesting of compressed gas containers,cylinders and tanks <br /> at container filling or servicing facilities or in seller's <br /> warehouses not accessible to the public.Nesting shall be <br /> allowed provided the nested containers,cylinders or tanks.if <br /> dislodged.do not obstruct the required means of egress.4. <br /> Securing of compressed gas containers,cylinders and tanks <br /> to or within a rack.framework.cabinet or similar assembly <br /> designed for such use.Exception:Compressed gas <br /> containers.cylinders and tanks in the process of <br /> examination.filling.transport or servicing. <br /> Pass 605.1-Abatement of electrical hazards <br /> Identified electrical hazards shall be abated.Electrical wiring, <br /> devices.appliances and other equipment that is modified or <br /> damaged and constitutes an electrical shock or fire hazard <br /> shall not be used. <br /> Pass 605.3-Working space and clearance <br /> A working space of not less than 30 inches(762 mm)in width, <br /> 36 inches(914 mm)in depth and 78 inches(1.981 mm)in <br /> height shall be provided in front of electrical service <br /> equipment.Where the electrical service equipment is wider <br /> than 30 inches(762 mm),the working space shall be not less <br /> than the width of the equipment.No storage of any materials <br /> shall be located within the designated working space. <br /> Exceptions:1.Where other dimensions are required or <br /> allowed by NFPA 70.2.Access openings into attic or <br /> underfloor areas,which provide a minimum clear opening of <br /> 20 inches(509 mm)by 40 inches(1.016 mm). <br /> Pass 605.3.1-Labeling <br /> Doors into electrical control panel rooms shall be marked <br /> with a plainly visible and legible sign stating ELECTRICAL <br /> ROOM or similar approved wording.The disconnecting <br /> means for each service.feeder or branch circuit originating <br /> on a switchboard or panelboard shall be legibly and durably <br /> marked to indicate its purpose unless such purpose is clearly <br /> evident. <br /> Pass 605.4-Multiplug adapters <br /> �✓ Multiplug adapters.such as cube adapters.unfused plug <br /> strips or any other device not complying with NFPA 70 shall <br /> be prohibited. <br /> GENERATED ON 3/17/26, 10:39 AM7 OF 10 <br />