Laserfiche WebLink
User Interface <br />The fire alarm control panel has a 2 x 16 LCD display to provide information to the system status. The <br />keypad has navigation keys to allow manipulation of the Menu on board the panel. The panel is shipped <br />standard with the following LEDs: <br />• AC Power - Green • Alarm - Red • Earth Fault -Amber • Supervisory -Amber <br />• Silenced -Amber • Trouble - Amber • Pre -Release - Amber • Release - Red <br />The common buttons include a Silence, Reset, Acknowledge, and Drill. All of the buttons are accessible <br />once the locked door is opened. <br />Ethernet/I.P. Connection <br />The JFS-IP60 is shipped standard with an Ethernet connection. This connection is the programming <br />port and may be connected to a building Wide Area Network (WAN) or Local Area Network (LAN). Once <br />connected to the Internet, the panel may be selectively programmed to e-mail alarm conditions, trouble <br />conditions, supervisory conditions, test, Event History and detector status. An e-mail may be sent to the <br />panel and the panel will e-mail the event history, detector status, configuration file or server status to an <br />authorized E-mail account. In addition, reminders may be set to send an e-mail for service, testing or <br />other conditions. <br />In addition, the Ethernet connection is UL listed as an IP communicator. The IP communicator is listed to <br />report to the UL listed Sur -Gard III IP receiver. The IP communicator replaces the traditional less reliable <br />alarm communicator transmitter that utilized telephone lines. The IP communicator is an active method <br />of connection and communication to the monitoring station. <br />P-Link <br />The JFS-IP60 has a proprietary communication protocol that communicates through a RS-485 con- <br />nection to field devices. Up to 64 devices may be connected to a single P-Link connection. The P-Link <br />includes the communication terminals and regulated 24 VDC connection for the field devices. The <br />field devices may be any of the following: <br />2 x 16 LCD annunciator with a key pad in a locked metal enclosure. <br />4 x 40 LCD annunciator with a key pad in a locked metal enclosure. Flush mount version avail- <br />able. <br />16 LED annunciator with common indicators in a locked metal enclosure. Flush mount version <br />available. <br />10 amp, remote intelligent power supply with 6 NACs, 2 I/Os and a P-Link repeater. This panel <br />is listed in conjunction with the JFS-IP60 as releasing circuits. <br />Class A convertor that converts the SLC, NACs and P-Link connection <br />UL listed, Dual line telephone alarm communicator <br />LED driver expander, used to connect up to 50 LEDs in a graphic display <br />Fire communication bridge, provides remote mounting of the Ethernet connection <br />Fiber interface module, used to extend P-Link to multimode fiber (2 required) <br />Relay module, provides 5 form C relay contacts rated at 3.0 amps 24VDC/125AC <br />Serial parallel gateway, allows for the connection to a serial or parallel printer <br />Multi -Connect allows up to sixty-three IP series panels to share a single reporting technology. <br />Two card expansion cabinet <br />Eight card expansion cabinet <br />Fourteen card expansion cabinet <br />DS1317 Revised: 23-Jul-2020 <br />Page 3 of 6 <br />