Laserfiche WebLink
PRODUCT IDENTIFICATION <br />This area provides identification of the product and a toll free <br />contact telephone number for questions or assistance with the <br />product and installation. <br />IMPORTANT INFORMATION <br />This area of the tile provides pertinent information about installation <br />and the need to use a trained applicator to install the product. <br />QUALITY INFORMATION on back <br />This area of the tile is used by the production department to <br />denote the date the part was manufactured. This allows tracking <br />of quality by production time. This information is on the back of <br />the tile. <br />INSTALLATION MEASUREMENT <br />Two marks are molded into every tile. When these marks are placed <br />in alignment with the top edge of the previous row of tiles, proper tile <br />exposure is provided automatically. <br />TILE FASTENING <br />Molded into each tile is a fastener locator. This assists during <br />installation for proper positioning of the fastener. <br />GAP <br />During installation the tiles must be placed a minimum of 3/8” (10 <br />mm) apart. Tiles must never be installed directly adjacent to each <br />other. This area of the tile states this in both English and Spanish.Empire Slate 12” (305 mm)Traditional <br />12” wide x 18” long <br />(305 mm x 457 mm) <br />Empire Slate <br />Chisel Point <br />12” wide x 18” long <br />(305 mm x 457 mm) <br />*6” (152 mm) exposure only* <br />Empire Slate <br />Beveled Edge <br />12” wide x 18” long <br />(305 mm x 457 mm) <br />Empire Slate <br />Beaver Tail <br />12” wide x 18” long <br />(305 mm x 457 mm) <br />PLEASE REMEMBER TO BEND TILES Empire Slate Installation Guide <br />Empire Slate <br />10” (254 mm) Traditional <br />10” x 18” long <br />(254 mm x 457 mm) <br />Designer Slate