Laserfiche WebLink
07/22 © Copyright 2022 EcoStar LLC. EcoStar, Empire Slate, Aqua Guard and Glacier Guard are trademarks of EcoStar LLC. <br />VersaShield is a registered trademark of GAF. DensDeck is a trademark of Georgia Pacific Corporation. <br />P/N–606002 Empire Slate Installation Guide. This installation guide, effective 07/25/2022 supersedes all previous versions. <br />42 Edgewood Drive | Holland, NY 14080 | Tel: 800.211.7170 | www.ecostarllc.com <br />Empire Slate Traditional Design <br />Standard Installation: This drawing <br />depicts the traditional tile installed in the <br />standard method. The bottom edge of each <br />tile is in line with the next and the vertical <br />spacing between the tiles is in line. <br />Empire Slate Chisel Point Design <br />This design can only be put down using a 6” <br />(152 mm) exposure. The design will not <br />accommodate any other exposure. The <br />installed product should look like this drawing. <br />Traditional style tiles must be used as <br />the starter row. <br />Empire Slate Beveled Edge Design <br />Use the standard installation methods <br />and place the tiles per this drawing. <br />Traditional style tiles must be used as <br />the starter row. <br />Empire Traditional Design <br />Staggered Installation: This drawing <br />depicts the traditional tile installed using <br />the staggered method. Each tile is installed <br />alternating between the 6” (152 mm) <br />exposure and the 7” (178 mm) exposure. <br />This creates more texture in the roof <br />system. <br />Empire Slate Beaver Tail Design <br />Use the standard installation methods <br />and place the tiles per this drawing. <br />Traditional style tiles must be used as <br />the starter row. <br />Empire Slate Installation Guide PLEASE REMEMBER TO BEND TILES