Laserfiche WebLink
<br />08-51-00 - 10 ALUMINUM WINDOWS – SERVICE BUILDING 08-51-00 - 10 <br /> <br />2. All units shall be glazed with a minimum of 1/2” glass bite. <br /> <br />E. Finish: Each window unit will have not less than two differing finish colors. <br /> <br />1. Exterior Finish: All aluminum windows, framing, trims and other components shall <br />receive a high performance baked-on 70% PVDF / Kynar Polyvinylidene Fluoride / <br />Fluoropolymer coating system finish conforming to AAMA 2605, and Aluminum <br />Association Designation AA-M12C22-A4X. More than one color may be selected for <br />this Project. <br /> <br /> a. Colors: Selected by the Architect from the manufacturer’s full line of colors <br /> <br /> <br />2. Interior Finish: All aluminum windows, framing, trims and other components shall <br />receive a high performance baked-on 70% PVDF / Kynar (Polyvinylidene Fluoride / <br />Kynar Fluoropolymer) coating system finish conforming to AAMA 2605, and <br />Aluminum Association Designation AA-M12C22-A4X. More than one color may be <br />selected for this Project. <br /> <br /> a. Colors: Selected by the Architect from the manufacturer’s full line of colors. <br /> <br />F. Interior Trim : <br /> <br />1. Provide two-component interior trim sections of size and configuration as shown on <br />the Drawings, and as required for a complete and finished installation. Interior trim <br />shall cover all wood frames to remain, all wood blocking and shims, and cover all <br />voids in existing and new wall construction. Architectural profiled trim shall have <br />jamb sections die coped by the manufacturer. <br /> <br /> a. Finish and Color: Match the window interior finish system and color specified. <br /> <br /> <br />2.04 WINDOW TYPES - Approved Window Series: <br /> <br />A. As indicated on the Drawings: <br /> <br />1. Each of the manufacturers’ window series listed herein have been determined to <br />meet these project specifications for performance, fabrication and construction, and <br />aesthetic quality subject to this Section. The approved window series are: <br /> <br />a. EFCO: 550-I (Basis of the Project Design and Specification) <br /> <br />b. Graham Architectural Products: GS6600 Series <br /> <br />c. Kawneer Company: 8225 TLF: <br /> <br />d. WAUSAU Window and Wall Systems: 2250-i Invent Series <br /> <br />e. Winco Windows: 1150 Series <br /> <br />f. YKK-AP: YOW 225 TU Series <br /> <br />e. Architect approved equal required prior to bid. <br /> <br />2. Operation: Project out and fixed. <br />