Laserfiche WebLink
City of South Bend Central Services Division <br />Fire Service, Inc./Wheeled Coach Ambulance <br />Specification <br />This assembly shall be bolted to the frame of the chassis with 5/8 inch Grade 8 <br />bolts. There shall be a one half inch clearance between the bumper assembly and <br />the rear of the modular body to allow water drainage and inhibit water collection. <br />SKIRT RAILS <br />Skirt rub rails will be installed to protect the lower body and will extend the entire <br />length of the body on the curb and street sides, exclusive of the wheel well area. <br />They shall be made from custom `C' channel that is cut at 45 degree angles on the <br />ends. The rub rail shall be bolted to the lower side wall panel with 1/4" nylon <br />spacers. A corrosion inhibitor shall be applied to the mounting holes prior to <br />installation. <br />SKIRT RAIL REFLECTIVE TAPE <br />Reflective tape shall be inserted into channel in extruded rubber skirtrail and <br />secured <br />with stainless steel screw at each end. Color shall be red. <br />SKIRT RAIL LIGHTING <br />There shall be three Whelen Strip-Lite Super LED 5MM series 11.5" strip lights <br />per side of the module in the skirt rail. There will be a Red Strip-Lite at the front <br />and rear of the module and a White Strip-Lite just forward of the rear wheels. <br />These lights shall flash when the Primary mode of the emergency warning lights <br />is activated. <br />FRONT STONE GUARDS <br />The lower front corners of the patient compartment shall have stone guards <br />attached to the corner extrusion. They shall be diamond plate aluminum and <br />extend from the bottom edge of the corner extrusion up 17 inches. A corrosion <br />inhibitor shall be applied to the mounting holes prior to installation. <br />10070-0003 11 /05/20 <br />25 <br />