Laserfiche WebLink
2021 International MV/PL Custom Titan 170 <br />Type I Ambulance Proposal Specification <br /> <br /> <br />A5347-0002 11/05/20 <br />55 <br /> <br /> <br />7. Total Dry Film Build System after detail/polish---4.7 to 6.4 mils. <br /> <br />PAINT CORROSION PROTECTION: <br /> <br />All exterior fastener locations that penetrate the paint on the modular body are to be treated with Electrolysis Corrosion <br />Kontrol (ECK). Every external fastener hole shall have ECK brushed into and around the hole for full coverage. The <br />perimeter of the hole shall be covered with a minimum of .5 diameter of ECK. This is to protect the head of the fastener <br />from touching the painted surface. All applications of ECK are to take place before component mounting. The fasteners <br />that are included in this process are for the following components: Lights, Light Bars, Hinges, Diamond plate panels, <br />Entrance and compartment door panels, fuel fill, license plate holder, Shoreline, Vent Covers, Rain Gutters, Rub Rails, <br />Fenderettes and Door Grabbers. Additional items that are mounted to the painted body will also be included. When an <br />item is cut into the body causing an unpainted edge, the unpainted edge shall be completely coated with ECK prior to <br />component mounting. <br /> <br />TEN YEAR PAINT WARRANTY <br /> <br />Manufacturer will warranty to original purchaser that the Paint is free from specific paint defects for 10 years from date th e <br />vehicle is delivered. Manufacturer will warranty 100% labor & materials for the following defects: coating system integrity, <br />coating adhesion and UV related degradation. Gloss retention and color retention. Cracking or checking of the paint film. <br />Delaminating from the substrate or intercoat. Manufacturer will warranty materials and labor to repair defects resulting from <br />dissimilar metals and crevice corrosion for a period of 5 years, 60,000 miles from date of delivery. Bidder must include <br />statement of warranty policy with bid. <br /> <br />PAINT ADHESION TESTING: <br /> <br />The manufacturer shall utilize a customized paint adhesion testing procedure to insure and verify that proper bonding of <br />the coatings to the substrate surface, has taken place. This test is performed on an intentional, sacri ficial test surface just <br />prior to the final polish stage. The coatings are cross hatch cut down to the substrate on multiple areas of the test surface . <br />An adhesion tape of Permacel 99 (or the equivalent) is bonded and then removed to verify the permanent bond of the <br />coatings. Each test surface panel is dated, logged and saved. The performed adhesion test is designed to exceed the <br />ASTM spec D 3359, “Standard Test Method for Measuring Adhesion by Tape Test”. <br /> <br />MODULAR BODY PAINT COLOR: <br /> <br />The entire modular body will be Red. The paint code number for the required color will be specified further in this <br />specification. <br /> <br />CAB PAINT : <br /> <br />The cab color shall remain OEM manufacturer’s red color as specified in the chassis spec portion of this document. <br /> <br />PAINT COLOR: <br /> <br />OEM Chassis Color: Elite Red (Freightliner L2684EB or International 2555, Red Met) (Custom) <br />Module Color Code: Match chassis color. <br /> <br /> <br /> <br />