My WebLink
|
Help
|
About
|
Sign Out
Home
Browse
Search
Opening of Bids - One (1) or More, 2020 or Newer, Emergency Medical Vehicle – Spec P - American Response Vehicles
sbend
>
Public
>
Public Works
>
Board of Works Documents
>
2020
>
Opening of Bids
>
Opening of Bids - One (1) or More, 2020 or Newer, Emergency Medical Vehicle – Spec P - American Response Vehicles
Metadata
Thumbnails
Annotations
Entry Properties
Last modified
11/12/2020 11:12:37 AM
Creation date
11/12/2020 11:10:06 AM
Metadata
Fields
Template:
Board of Public Works
Document Type
Contracts
Document Date
11/10/2020
Jump to thumbnail
< previous set
next set >
There are no annotations on this page.
Document management portal powered by Laserfiche WebLink 9 © 1998-2015
Laserfiche.
All rights reserved.
/
340
PDF
Print
Pages to print
Enter page numbers and/or page ranges separated by commas. For example, 1,3,5-12.
After downloading, print the document using a PDF reader (e.g. Adobe Reader).
Show annotations
View images
View plain text
wheel well. It shall have approximate exterior dimensions of: <br /> <br />26" wide x 84" high <br /> Y___N___ <br /> <br />6.14.2 The D1 compartment shall have a solid, flush mounted, vertically hinged door, <br />constructed of aluminum. <br /> Y___N___ <br />6.14.3 A low compartment (D2) shall be provided in the rearward position ahead of <br />the wheel well. It shall have approximate exterior dimensions of: <br /> <br />43" wide x 33" high. <br /> Y___N___ <br />6.14.4 The D2 compartment shall have double solid, flush mounted, vertically hinged <br />doors. Each door shall be constructed of aluminum. <br /> Y___N___ <br /> <br />6.14.5 REAR OF WHEEL WELL - D4 <br /> <br />A compartment shall be provided in the area rearward of the rear wheel well. It shall <br />have the approximate dimensions as follows: <br /> <br />43" wide x 45" high <br /> Y___N___ <br /> <br />6.14.6 The D4 compartment shall have double solid, flush mounted, vertically hinged <br />doors. Each door shall be constructed of aluminum. <br /> Y___N___ <br /> <br /> <br />6.14.7 RIGHT SIDE COMPARTMENTATION <br /> <br />There shall be no P1 or ALS exterior compartment door provided. Access for the <br />ALS cabinet shall be from the interior only. <br /> Y___N___ <br /> <br />6.15 SIDE ENTRY DOOR <br /> <br />The entry/egress door shall be constructed of .125" aluminum sheet box formed with <br />a 1-7/8" return bend supporting the .090" 3003 alloy aluminum diamond plate inner <br />liner. Extruded doors and/or doorframes are not acceptable. In addition, for <br />maximum rigidity, 1-1/2" "C" channel bracing shall be added internally for additional <br />door structural integrity. <br /> <br />The door shall have a FMVSS approved Tri-Mark rotary latch with a Tri-Mark locking <br />handle and shall have a two-point rotary latch with adjustable Nader pins located on <br />the side of the door. It shall also be equipped with a spring assisted two-directional <br />cam-over door check. The door shall provide a clear opening of at least 32" wide <br />and 74" high. When opened, the door shall activate the interior dome lights. Each <br />access door is to be stamped with an alphanumeric code; this will enable the exact <br />replacement of a damaged door. <br /> Y___N___ <br /> <br />6.16 STEPWELL <br />
The URL can be used to link to this page
Your browser does not support the video tag.