Laserfiche WebLink
American Response Vehicles <br />53 <br /> <br />CABINET "A": An upper, interior cabinet will be provided directly over the rearward section of the Base wall <br />cabinet. This cabinet will accommodate a power air exhaust blower with a removable service panel. This <br />multipurpose cabinet interior will be finished as stated in the cabinet construction specification. Must meet <br />current Federal specification KKK-A-1822. This cabinet will feature a sliding secure latch restocking window, <br />top hinged. The cabinet will have (1) adjustable shelf. <br /> <br />CABINET "B" ALUMINUM COMPOSITE: An upper, interior cabinet will be provided directly over the "Action <br />Area". This multipurpose cabinet interior will be finished in high impact, white colored laminate. The cabinet <br />will be ergonomically angled toward the CPR seat. Must meet current Federal specification <br />KKK-A-1822. This cabinet will feature a sliding secure latch restocking window, top hinged. The cabinet will have <br />(1) adjustable shelf. <br /> <br />CABINET "CPR": An upper, interior cabinet will be provided directly over the CPR side seat in the Base wall <br />cabinet. This multipurpose cabinet interior will be finished in high impact, white colored mica that is <br />impervious to disinfectants and cleaners. The cabinet will have two openings, separated by a flush divider. <br />Two separate door systems will exist to contain the contents of the cabinet. Each cabinet opening will have a <br />single flip up lexan door with Reel Torque Style hinges and a non-locking round pull latch. <br /> <br />CABINET "G1 & G2": An interior cabinet will be provided above the squad bench, on the curb side of the <br />vehicle. This multipurpose cabinet interior will be finished in high impact, white colored mica that is <br />impervious to disinfectants and cleaners. The cabinet will have two openings, separated by a flush divider. <br />Two separate door systems will exist to contain the contents of the cabinet. <br /> <br />BASE WALL CABINET: The base wall cabinet is located on the Street side (Left side) of the patient cabin. The <br />overall height of the Base Wall Cabinet will be approximately 75% of the overall head room. This cabinet will <br />be built in ONE piece. The laminate along the fascia will be ONE piece on single color laminate selections. A <br />CPR Side Seat will be provided on the street side aligned with the primary patient abdomen. <br /> <br />ACTION AREA: The action area is a work surface located on the forward end of the Base Wall Cabinet and <br />adjacent to the attendant seat. The work surface will be at least 5.5 square feet. The work area height will be <br />24 inches to 29 inches. The work surface will have a three quarter inch (3/4") high lip. <br /> <br />ACTION AREA COUNTER SURFACE: The action area counter surface will be made from one half inch thick solid <br />surfacing material. The color will complement the color scheme of the mica, floor, and upholstery in the <br />remaining areas of the vehicle interior. This material will be installed by certified personnel trained on the <br />specific brand of solid surfacing material being installed. <br /> <br />The proposed solid surfacing material will meet the following minimum technical specifications: <br /> TEST TEST VALUE TEST METHOD <br />Stain Resistance: 24 ANSI 5.2.1 <br />Barcol Hardness 60-62 Barcol Impressor