Opening of Bids - One (1) or More, 2020 or Newer, Emergency Medical Vehicle – Spec P - American Response Vehicles

Home Browse Search

American Response Vehicles 50 The door will be a solid hinged door with a non-locking round pull latch. PLASTIC VENT: A fifteen square inch free air flow ventilation hole he cut into the above door. The edges of the cut out will be banded. The hole will be covered with an aesthetically appealing, molded plastic louver cover. The louver cover will be black in color and secured with at least one No 8 screw in each corner. RIGHT FRONT CABINET (I): The right front cabinet is hereinafter known as the ALS cabinet. The cabinet will be constructed of aluminum and composite materials as appropriate. All fixed and adjustable shelf surfaces will be covered in Easy Grip material. All fixed and adjustable shelf lips will be covered with anodized aluminum trim. All shelves will have a ¾ lip. The ALS cabinet will provide at least 22.0 cubic feet of storage and Configured as follows. GLOVE BOX STORAGE RIGHT FRONT ALS CABINET: There will be a storage section in the front right ALS cabinet for the storage of examination gloves. The cabinet will be built to house three independent boxes, single depth. A singular acrylic door will retain the boxes, secured by a latch. The door will have 3 separate machined openings, smooth and burr free. The independent openings will allow for gloves to be removed without opening the door. The door will be a left hinged lexan door with a non-locking round pull latch. Cabinet I-1: This cabinet is located on the top section of the ALS (Cabinet I). This cabinet will have a solid bottom hinged door with a locking round pull latch. CABINET I-2: The lower section will be will meet current Federal specification KKK-A-1822. Access from the inside will be as follows below. ALS CABINET WEBBING: There will be a removable cover over the right front ALS cabinet opening. The cover will consist of 2" seat belt webbing material. The 2" webbing will be constructed so that the openings are no larger than about 7" squares. The ends will be sewn in loops to allow installation through a metal footman style loop that will be fastened to the edge of the ALS cabinet. The netting will be quick released for access to the secured equipment through automotive style metal buckles. The design will be so that the stored medical equipment is not able to come through the holes in the net and is secured when the net is in place. STOWAGE LABEL: A label will be applied for the entire area covered by a single cargo net indicating its ability to restrain 80 pounds of contents within the stowage area. This net as built by the manufacturer has been tested to SAE J3058 and found to have a safe working capacity of 80 pounds of stowage capacity restraint. This item is compliant to section 3.11.3 of KKK-A-128F dated July 1, 2017. (Cabinet I) OUTSIDE ACCESS DELETION: This cabinet level will NOT have outside access through the right front compartment door. This level will be blocked off from outside access for security. SHELF STANDARDS: The aforementioned cabinet will be equipped with non-incremental, aluminum, C- shaped shelf standards.