Laserfiche WebLink
American Response Vehicles <br />29 <br />LIGHTS POWERED BY TIMER: The aforementioned timer will power the LED Light Rail system on the medium <br />intensity setting. The duration of the light will vary with the setting of the timer. <br /> <br />INTERIOR CHECKOUT TIMER: A programmable timer circuit will be included as part of the AEV LX1 Multiplexed <br />electrical system. It will be activated with the opening of either the Curbside or Rear Access Doors. The circuit <br />will be constant hot and only operate with the Battery Switch in the off position. <br /> <br />INTERIOR CHECKOUT TIME FRAME: The light circuit will stay on for a period of 15 minutes. <br /> <br />LIGHTS POWERED BY TIMER: The aforementioned timer will power the LED Light Rail system on the low <br />intensity setting. <br /> <br />AUXILIARY STEREO SPEAKERS: Two 5 inch diameter stereo speakers will be wired to the OEM Dash mounted <br />radio. The speakers will be rated at least 30 watts, 16W RMS with 4 ohms of impedance. The magnet will be <br />at least 6 ounces. One speaker will be located in the center pad toward the front of the patient cabin and <br />one toward the rear. <br /> <br />VOLUME CONTROL: A variable volume control for the patient compartment stereo speakers will be provided <br />in the action area panel, adjacent to the switch panel. <br /> <br />I.V. BAG HANGING HARDWARE: The following will be self-contained recessed I.V. Hook assemblies that will be <br />installed in the ceiling. Each I.V. Hook assembly will fold and stow recessed in a cast aluminum housing. The <br />hooks are to be spiral shaped to preclude I.V. Bag from falling off with push button release for each fluid bag. <br />Each I.V. Hook assembly will hold (2) two bags of fluid. A rubber with Velcro anti-sway device will be included <br />for IV retention, without depending on adjacent cabinetry. <br /> <br />I.V. BAG HANGING HARDWARE, No 1: Located of the Primary patient, in the close proximity to the <br />Head/Chest area of the patient. <br /> <br />I.V. BAG HANGING HARDWARE, No 2: Located of the Secondary patient, in the close proximity to the <br />Head/Chest area of the patient. <br /> <br />I.V. BAG HANGING HARDWARE, No 3: Located of the Primary patient, in the close proximity to the Knee/Waist <br />area of the patient. <br /> <br />I.V. BAG HANGING HARDWARE, No 4: Located of the Secondary patient, in the close proximity to the <br />Knee/Waist area of the patient. <br /> <br />RECESSED CURB SIDE OVER HEAD ASSIST RAIL: The rail will exceed the current revision of current Federal <br />specification KKK-A-1822. The rail will be 1 ¼ diameter, 100% stainless steel with gray anti-microbial coating and <br />72 inches long. All rail fittings will be TIG welded to the main rail. The rail will be recessed in an ABS pan 1.5", <br />located curbside of center pad.