Laserfiche WebLink
American Response Vehicles <br />17 <br />who are making urgent egress from the cab to module of the ambulance. The transition plate will be securely <br />fastened on one side only, so as to allow the module body to flex independent of the chassis cab. <br /> <br />BODY DROP: Both sides of the modular body, ahead of the rear wheels, will be 6" lower than behind the rear <br />wheels. This body drop will allow the curbside entry step to be lower to ground level making it easier to enter <br />the curbside entry door and meet the requirement of KKK-A-1822 latest revision. <br /> <br />LEFT FRONT COMPARTMENT (M-1): This compartment will be located in the left front corner of the modular <br />body. The minimum compartment dimensions will be 61.5" high x 22.125" wide x 20" deep. <br /> <br />VENTILATION: There will be three sets of six louver punches on the outside and inside door panel to properly <br />ventilate the electrical components located in the above mentioned compartment. <br /> <br />COMPARTMENT DOOR: A single, forward hinged, compartment door will be set for this compartment. The door <br />will have a single handle and two rotary latches. <br /> <br />COMPARTMENT LIGHT: (1) One light will be mounted in the ceiling of the "M-1" compartment. The light will be <br />surface mount and will be LED. <br /> <br />LEFT FRONT UPPER COMPARTMENT (M-1A): This compartment will be located in the left front corner of the <br />modular body. The minimum compartment dimensions will be 17.8" high x 22.125" wide x 20" deep. <br /> <br />VENTILATION: The M-1A compartment will have special ventilation of a conversion hot power twelve volt fan <br />and one row of punched half-moon louvers on the compartment door. <br /> <br />COMPARTMENT DOOR: A single, forward hinged, compartment door will be set for this compartment. The door <br />will have a single handle and one rotary latch. <br /> <br />COMPARTMENT LIGHT: (1) One light will be mounted in the ceiling of the "M-1A" compartment. The light <br />will be surface mount and will be LED. <br /> <br />LEFT FRONT MIDDLE COMPARTMENT (M-2): This compartment is located adjacent and rearward to the left <br />front compartment. The minimum compartment dimensions will be 36.7" High x 42.8" Wide x 20" Deep. <br /> <br />BIO-WASTE CLOSEOUT: Outside enclosure box for interior only access to the bio-waste receptacle will be <br />provided in the exterior compartment. The closeout will be located in the upper right hand corner of the <br />compartment, aligned with the bio-waste cavity built into the action area tray. The closeout will be made out of <br />the same material as the compartment interior and will be finished out as though it was designed to be there <br />and not screwed in place as an afterthought. <br /> <br />ELECTRICAL COMPARTMENT: The electrical main area has been relocated to interior access only cabinet H.