Laserfiche WebLink
Liberty Tower Exterior Renovations - Ph 2 <br />South Bend, Indiana <br />© Copyright, Kil Architecture / Planning <br />September 2020 <br />1.6 SUBMITTALS <br />A. See Section 013000 - Administrative Requirements, for submittal procedures. <br />B. Product Data: Provide data on cleaning equipment & procedures. <br />1.7 QUALITY ASSURANCE <br />A. Comply with provisions of TMS 402/602, except where exceeded by requirements of Contract <br />Documents. <br />1.8 FIELD CONDITIONS <br />A. Cold and Hot Weather Requirements: Comply with requirements of TMS 402/602 or <br />applicable building code, whichever is more stringent. <br />PART 2 PRODUCTS <br />2.1 MORTAR MATERIALS <br />A. Comply with requirements of Section 04 0511. <br />2.2 SEALANT MATERIALS <br />A. Comply with requirements of Section 07 9200, Joint Sealants. <br />PART 3 EXECUTION <br />3.1 EXAMINATION <br />A. Verify that surfaces to be cleaned are ready for work of this section. <br />3.2 PREPARATION <br />A. Carefully remove and store removable items located in areas to be restored, including fixtures, <br />fittings, finish hardware, and accessories; reinstall upon completion. <br />B. Remove abandoned hardware, anchors, conduits and similar items from surface of masonry. <br />1. Identify all items to be removed and confirm status with Owner's mamenance staff. <br />2. Patch remaining holes of 3/8" width or less with latex sealant. <br />3. Patch remaing holes in exess of 3/8" width with mortar. <br />C. Separate areas to be protected from restoration areas using means adequate to prevent damage. <br />MAINTENANCE OF MASONRY 04 0100 - 2 <br />