Opening of Bids - Seitz Park Reconstruction Phase I Proj No. 117-093A - Northern Indiana Construction Co., Inc.

Home Browse Search

A roll -up door compartment over the rear wheels shall be provided. The interior dimensions of this compartment shall be 61.00" wide x 36.00" high x 12.00" deep. The height of the compartment shall be measured from the compartment floor to the bottom edge of the door roll. The depth of the compartment shall be calculated with the compartment doorclosed. The clear door opening of this compartment shall be maximized Closing of the door shall not require releasing, unlocking, or unlatching any mechanism and shall easily be accomplished with one hand A full height, roll -up door compartment ahead of the rear wheels shall be provided. The interior dimensions of this compartment shall be 3 0.00" wide x 47.00" high x 26.00" deep in the lower 26.00" of the compartment and 12.00" deep in the remaining upper portion. The height of the compartment shall be measured from the compartment floor to the bottom edge of the door roll. The depth of the compartment shall be calculated with the compartment door closed. The compartment interior shall be fully open from the compartment ceiling to the compartment floor and designed so that no permanent dividers are required between the upper and lower sections. The clear door opening of this compartment shall be 28.75" wide x 58.25" high. Closing of the door shall not require releasing, unlocking, or unlatching any mechanism and shall easily be accomplished with one hand. A horizontally hinged pan door compartment over the rear wheels shall be provided. The interior dimensions of this compartment shall be 61.00" wide x 20.00" high x 12.00" deep. The height of the compartment shall be measured from the compartment floor to the bottom edge of the door roll. The depth of the compartment shall be calculated with the compartment door closed The clear door opening of this compartment shall be maximized. Closing of the door shall not require releasing, unlocking, or unlatching any mechanism and shall easily be accomplished with one hand. A full height, roll -up door compartment behind the rear wheels shall be provided. The YES interior dimensions of this compartment shall be 48.00" wide x 47.00" high x 12.00" deep. A section of this compartment shall be 25.88" deep x 47.50" wide x 26.00" high directly behind the rear wheels. The height of the compartment shall be measured from the compartment floor to the bottom edge of the door roll. The depth of the compartment shall be calculated with the compartment door closed. The compartment interior shall be fully open from the compartment ceiling to the compartment floor and designed so that no permanent dividers are required between the upper and lower sections. The clear dooropening of this compartment shall be maximized. Closing of the door shall not require releasing, unlocking, or unlatching any mechanism and shall easily be accomplished with one hand. There shall be SCBA bottle storage in front of wheel well. ROLL -UP DOOR, SIDE COMPARTMENTS There shall be eight (8) compartment doors installed on the side compartments, double faced, aluminum construction, manufactured by R.O.M. brand roll -up doors. Door(s) shall be constructed using 1.00" extruded double wall aluminum slats which will feature a flat smooth interior surface to provide maximum protection against equipment p hang-up. The slats shall be connected with a structural driven ball and socket hinge designed to provide maximum curtain diaphragm strength. Mounting and adjusting the curtain shall be done with a clip system that connects the curtain to the balancer drum allowing for easy tension adjustment without tools. The slats shall be mounted in reusable slat shoes with positive snap -lock securement. Each slat will incorporate weathertight recessed dual durometer seals. One (1) fin will be designed to locate the seal within the extrusion. The second will serve as a wiping seal whit 53