Laserfiche WebLink
Evidence of actual testing techniques shall be made available upon request. <br />COMPARTMENTATION, DRIVER'S SIDE <br />Sizes are estimated to show scope. Actual sizes to be determined at prebuild meeting actual <br />size shall maximum all available space. A full height, roll -up door compartment ahead of th( <br />rear wheels shall be provided. The interior dimensions of this compartment shall be 30.00" <br />wide x 66.00" high x 26.00" deep in the lower 26.00" of the compartment and 12.00" deep it <br />the remaining upper portion. The height of the compartment shall be measured from the <br />compartmentfloor to the bottom.edge of the door roll. The depth of the compartment shall by <br />calculated with the compartment door closed. The compartment interior shall be fully open <br />from the compartment ceiling to the compartment floor and designed so that no permanent <br />dividers are required between the upper and lower sections. The clear door opening of this <br />compartment shall be maximized <br />Closing of the door shall not require releasing, unlocking, or unlatching any mechanism and <br />shall easily beaccomplished with one hand <br />A roll -up door compartment over the rear wheels shall be provided. The interior dimensions <br />of this compartment shall be 61.00" wide x 36.00" high x 12.00" deep. The height of the <br />compartment shall be measured -from the compartment floor to the bottom edge of the door <br />roll. The depth of the compartment shall be calculated with the compartment door closed. <br />The clear door opening of this compartment shall be maximized. <br />Closing of the door shall not require releasing, unlocking, or unlatching any mechanism and <br />shall easily be accomplished with one hand <br />A full height, xolL-.updoor compartmentbehind the rear wheelsshallbe_provided. The <br />interior dimensions of this compartment shall be 47.50" wide x 66.00" high x 26.88" deep in <br />the lower 26.00" of height and 12.00" deep in the remaining upper section of the <br />compartment. The height of the compartment shall be measured from the compartment floor <br />to the bottom edge of the door roll. The depth of the compartment shall be calculated with <br />the compartment door closed. The compartment interior shall be fully open from the <br />compartment ceiling to the compartment floor and designed so that no permanent dividers <br />are requiredbetween the upper and lower sections. The clear doorupening of this <br />compartment shall be maximized <br />Closing of the door shall not require releasing, unlocking, or unlatching any mechanism and <br />shall easily be accomplished with one hand <br />There shall be SCBA bottle storage in front of wheel well. <br />COMPARTMENTATION, PASSENGER'S SIDE <br />Sizes are estimated to show scope. Actual sizes to be determined at prebuild meeting actual <br />size shall maximum all available space. A full height, roll -up door compartment ahead of the <br />rear wheels shall be provided The interior dimensions of this compartment shall be 30.00" <br />wide x 66.00" high x 26.00" deep in the lower 26.00" of the compartment and 12.00" deep in <br />the remaining upper portion. The height of the compartment shall be measured from the <br />compartment -floor to the bottom, edge of thed-oor roll. The depth of the compartment shall be <br />calculated with the compartment door closed. The compartment interior shall be fully open <br />from the compartment ceiling to the compartment floor and designed so that no permanent <br />dividers are required between the upper and lower sections. The clear door opening of this <br />compartment shall be maximized <br />Closing of the door shall not require releasing, unlocking, or unlatching any mechanism and <br />shall easily be accomplished -with one hand.-_y.._ <br />Ufa <br />