Opening of Bids - Seitz Park Reconstruction Phase I Proj No. 117-093A - Northern Indiana Construction Co., Inc.

Home Browse Search

points of thepiping. OUTLETS (Rear) There shall be two (2) discharge outlets piped to the rear of the apparatus, installed so p clearance is provided for spanner wrenches or adapters. Plumbing shall consist of 2.50" piping along with a 2.50" full flow ball valve with the control from the pump operator's panel. )ISCHARGE CAPS Chrome plated, rocker lug, caps with chains shall be furnished for all side discharge outlets. The caps shall be the VLH, which incorporates an exclusive thread design to automatically relieve stored pressure in the line when disconnected. (no exception) BLEEDER VALVE A .75" bleedervalve shall be provided for each outlet 1.50" or larger. Automatic drainvalv4 are preferred with some outlets if deemed appropriate with the application. The valves shall be located behind the panel with a swing style handle control extended to the outside of the side pump panel. The handles shall be chrome plated and provide a visual indication of valve position. The swing handle shall provide an ergonomic position for operating the valve without twisting the wrist and provides excellent leverage. Bleeders sha be located at the bottom of the pump panel. They shall be properly labeled identifying the discharge they are plumbed in to. The water discharged by the bleeders shall be routed beloi the chassis frame rails. REAR RIGHT OUTLET The 2.50" discharge outlets, located on the rear panel, shall be furnished with a 2.50"(F) National Standard hose thread x 2.50"(M) National Standard hose thread, chrome plated, degree elbow. The elbow shall incorporate a thread design to automatically relieve stored pressure in the line when disconnected. REAR LEFT OUTLET The 2.50" discharge outlet, located on the rear panel, shall be furnished with a 2.50"(F) National Standard hose thread x 2.50"(K National Standard hose thread, chrome plated, degree elbow. elbow shall incorporate a thread design to automatically relieve storedpressure in the disconnected. M, 4.00" OUTLET The 4.00" outlet shall be furnished with a 4.00"(F) National Standard hose thread x 5.00" Storz elbow adapter with Storz cap. There shall be three (3) adapters with 1.50" FNST X IPT threads on 1.5" outlets. These adapters shall be installed on both cross lay discharges and the front bumper discharge, all adapters to be chrome plated. There shall be six (6) adapters with 2.50" FNST x 1.50" MNPSH Chrome and cap. These adapters shall be installed on all 2.50" discharges. )ISCHARGE OUTLET CONTROLS The discharae outlets shall incorporate a quarter -turn ball valve with the control located at 61