Laserfiche WebLink
<br /> <br />O w n e r ’ s I n i t i a l s _________ <br />P a g e | 4 <br />Framing – Exterior Walls <br /> <br />Exterior Walls conventionally framed with 2” x 6”, 16” on center, single top <br />and bottom plate. Headers over door and window openings. <br /> <br />Approx. Rough opening dimensions for doors and windows: <br /> <br />A- Door off of kitchen (RO 38 ¼”W x 82”H) <br />B- Door off of mudroom/laundry ((RO 38 ¼”W x 82”H) <br />C- Window upstairs (RO 36 ½”W x 38 ½”H) <br />D- Preserved windows to be measured onsite for RO <br /> <br />Framing – Ceiling <br /> <br />Flat Ceiling: <br /> <br />2” x8”- 16” on center to create a flat ceiling of approx. 102” height. <br /> <br />Framing – Roof <br /> <br />Roof to be built at a 2-12 pitch sloping away from house on both kitchen and <br />mudroom/laundry additions. <br /> <br />Framing – Interior Walls <br /> <br />Interior walls conventionally framed with 2” x 4”, 16” on center, single top <br />and bottom plate. <br /> <br />Roofing <br /> <br /> Install new High-density polyisocyanurate cover board over ¾” <br />plywood decking, approximately 350sf <br /> Over the cover board, fully adhere .060 EPDM membrane, <br />approximately 350sf <br /> At the sloping edges, install 3”-faced metal edging with 1” gravel <br />stop, approximately 32lf <br /> At gutter edge, install 2”-faced metal edging, approximately 25lf <br />o We will match existing metal flashing color as closely as <br />possible <br /> At 2nd story wall side, flash EPDM 6-9” up wall <br /> Flash all metal edging and seams according to EPDM manufacturer’s <br />detail drawings and technical specifications <br />