Laserfiche WebLink
<br />Mule-Hide Products Co., Inc. Page 1 of 3 PDS 09-1305 <br />Product Data Sheet <br />STANDARD BLACK EPDM MEMBRANE <br />PRODUCT DESCRIPTION Revision Date: Sept 2019 <br /> <br />Mule-Hide Standard Black EPDM membranes are high performance non-reinforced membranes that stand up to <br />tearing, impacts, punctures and normal roof traffic. The elastomeric properties of the EPDM membranes <br />compensate for thermal shock and building movement. EPDM membranes provide excellent resistance to ozone <br />and aging. The EPDM membranes are manufactured in accordance w ith the guidelines established by the RMA <br />(Rubber Manufacturers Association) and meet or exceed the ASTM <br />Standard Specification D 4637, Type I. Mule-Hide Standard Black <br />EPDM membranes are Fire Retardant (FR) membranes specially <br />formulated to inhibit spread of flame and meet or exceed code <br />body testing criteria for fire retardant roofing membranes. Mule- <br />Hide Standard Black EPDM membranes are available with in-seam <br />tape that is pre-applied to the sheet <br /> <br />BASIC USES <br /> <br />Can be used as an elastomeric single-ply roofing membrane for new <br />construction and re-roofing applications. May be installed in <br />Ballasted and Fully Adhered roofing systems. <br /> <br />SPECIFICATIONS – Mule-Hide .045" and .060" thick Standard Black EPDM Membranes. <br /> <br />Physical Properties* Test Method Standards Typical Values <br />.045 .060 <br />Tolerance on Nominal Thickness, % ASTM D 412 + 10 + 10 + 10 <br />Weight, lbm/ft2 (kg/m2) 0.29 (1.4) 0.39 (1.9) <br />Tensile Strength, min, psi(Mpa) ASTM D 412 1305 (9) 1600 (11.0) 1600 (11.0) <br />Elongation, Ultimate, min, % ASTM D 412 300 480 465 <br />Tear Strength, min, lbf/in (kN/m) - (Die C) ASTM D 624 150 (26.3) 200 (35.0) 200 (35.0) <br />Factory Seam Strength, min. ASTM D 816 <br />(Modified) <br />Membrane <br />Rupture <br />Membrane <br />Rupture <br />Membrane <br />Rupture <br />Resistance to Heat Aging** <br /> Properties after 4 weeks @ 240oF(116oC) <br /> Tensile Strength, min, psi(MPa) <br /> Elongation, Ultimate, min, % <br /> Tear Resistance, min, lbf/in(kN/m) <br /> Linear Dimensional Change, max, % <br />ASTM D 573 <br /> <br />ASTM D 412 <br />ASTM D 412 <br />ASTM D 624 <br />ASTM D 1204 <br /> <br /> <br />1205(8.3) <br />200 <br />125(21.9) <br />+ 1.0 <br /> <br /> <br />1500(10.3) <br />225 <br />215 (37.6) <br />-0.4 <br /> <br /> <br />1450(10.0) <br />280 <br />215 (37.6) <br />-0.5 <br />Ozone Resistance** <br /> Conditions after exposure 100 pphm <br /> Ozone in air for 168 hrs @ 104oF(40oC) <br /> Specimen is at 50% strain <br /> <br />ASTM D 1149 <br /> <br />No Cracks <br /> <br />No Cracks <br /> <br />No Cracks <br />Brittleness Temp., max, deg. F (deg.C) ASTM D 746 -49 (-45) -49 (-45) -49 (-45) <br />Resistance to Water Absorption** <br /> After 7 days immersion @ 158oF (70oC), <br /> Change in mass, max, % <br /> <br />ASTM D 471 <br /> <br />+8, -2 <br /> <br />+2.0 <br /> <br />+2.0 <br />Water Vapor Permeability** <br /> MAX. perm mils <br />ASTM E 96 <br />(Proc. B or BW) <br />0.10 0.05 0.03 <br />Flexibility/Torsion DMA @-40°F ASTM D5279-08 N/A 225 Mpa 225 Mpa <br />Resistance to Outdoor (Ultraviolet) <br />Weathering - Xenon-Arc, exposure, 0.70 <br />W/m2 irradiance,176oF (80oC) black panel <br />temperature <br />ASTM G 155 <br />No Cracks <br />No Crazing <br />7,560 kJ/m2 <br />3,000 hours <br />No Cracks <br />No Crazing <br />41,580 kJ/m2 <br />16,500 hours <br />No Cracks <br />No Crazing <br />41,580 kJ/m2 <br />16,500 hours <br />At 0.35 W/m2 irradiance,176oF (80oC) black <br />panel temperature <br /> 6,000 hours 33,000 hours 33,000 hours <br />Fungi Resistance ASTM G21 N/A 0 (no growth) 0 (no growth) <br />