Laserfiche WebLink
<br /> <br />Page 2 <br />(Exhibit A – Engineer’s Services) <br />EJCDC E-500 Agreement Between Owner and Engineer for Professional Services <br />Copyright © 2008 National Society of Professional Engineers for EJCDC. All rights reserved. <br /> <br />linework and surface model. CAD file shall be AutoCAD, Civil 3D format. <br />1.13. Provide Survey field book in PDF format. <br />1.14. Perform quality assurance and quality control. <br />1.15. Provide survey deliverables within 90 days from notice-to-proceed, subject to weather <br />limtations. <br />2. SUE Designating (QL-B) As Needed <br /> 2.1. Locate all underground utilities (Public and Private) for the project as indicated. <br />2.2. Locates would be for a QL-B Survey (Horizontal Markings - Paint and Flags ONLY) to <br />mark all utilities within the project boundaries. <br />2.3. Use EM Locating Technology to locate lines, and GPR technology would be utilized to <br />assist in locating difficult lines. <br /> <br />PART 2 – ADDITIONAL SERVICES <br />A2.01 Additional Services Requiring Owner’s Written Authorization <br /> <br />A. If authorized in writing by Owner, Engineer shall furnish or obtain from others Additional Services <br />of the types listed below. <br />1. Preparation of applications and supporting documents (in addition to those furnished under <br />Basic Services) for private or governmental grants, loans, or advances in connection with <br />the Project; preparation or review of environmental assessments and impact statements; <br />review and evaluation of the effects on the design requirements for the Project of any such <br />statements and documents prepared by others; and assistance in obtaining approvals of <br />authorities having jurisdiction over the anticipated environmental impact of the Project. <br />2. Services to make measured drawings of or to investigate existing conditions or facilities, or <br />to verify the accuracy of drawings or other information furnished by Owner or others. <br />3. Services resulting from significant changes in the scope, extent, or character of the portions <br />of the Project designed or specified by Engineer or its design requirements including, but <br />not limited to, changes in size, complexity, Owner’s schedule, character of construction, or <br />method of financing; and revising previously accepted studies, reports, Drawings, <br />Specifications, or Contract Documents when such revisions are required by changes in <br />Laws and Regulations enacted subsequent to the Effective Date or are due to any other <br />causes beyond Engineer’s control. <br />4. Services resulting from Owner’s request to evaluate additional Study and Report Phase <br />alternative solutions beyond those identified in Paragraph A1.01.A.4. <br />5. Services required as a result of Owner’s providing incomplete or incorrect Project <br />information to Engineer. <br />6. Providing renderings or models for Owner’s use.