Laserfiche WebLink
<br />08-51-00 - 1 ALUMINUM WINDOWS – SERVICE BUILDING 08-51-00 - 1 <br />SECTION 08-51-00 - ALUMINUM WINDOWS – SERVICE BUILDING <br /> <br />PART 1 - GENERAL <br /> <br />1.01 RELATED DOCUMENTS: <br /> <br />A. Drawings and general provisions of Contract, including General and Supplementary <br />Conditions and Division - 1 Specification Sections, apply to work of this Section. <br /> <br />B. Related Work Specified Elsewhere: <br /> <br />1. Lumber - Section 06-05-00 <br /> <br />2. Rough Carpentry – Section 06-10-00 <br /> <br />3. Finish Carpentry – Section 06-20-00 <br /> <br />4. Thermal Protection – Section 07-20-00 <br /> <br />5. Joint Sealants – Section 07-92-00 <br /> <br />6. Painting – Section 09-90-00 <br /> <br />1.02 DESCRIPTION OF WORK: <br /> <br />A. Work required under this Section consists of providing and installing Aluminum Architectural <br />Windows complete with hardware and elated components, insulated metal panel insert, and <br />exterior attached sun shade devices as shown and indicated on the Drawings and as <br />specified herein. <br /> <br />1. Project Location: SBSCS SERVICE BUILDING, 420 S. Eddy Street, South Bend, IN <br /> <br />2. Window Replacement W ork Includes: <br /> <br />a. Provide labor, materials and equipment necessary to complete the work of the <br />Contract, and without limiting the generality thereof. <br /> <br />b. Remove existing sash, fixed glazing, frames and other accessories, materials <br />and the like not required to remain as required for the installation of the <br />proposed replacement system as established in the Contract Scope of Work <br />in Division - 1 of the Project Manual. <br /> <br /> c. Removal from site and legal disposal of all removed materials, debris, <br />packaging, banding and all other surplus materials and equipment. <br /> <br /> d. Provide new factory glazed, thermally broken, aluminum windows as <br />specified herein, together with necessary mullions, panning, trim, expanders, <br />operating hardware, installation hardware and all other accessories as <br />required for a complete functioning window fenestration. <br /> <br /> e. Install insulation between window frames and adjacent construction. Install <br />insulating material specified in this Section. <br /> <br /> f. Sealing of all joints within each window assembly. <br /> <br /> g. Sealing of entire perimeter – exterior and interior - of the window unit <br />assemblies after installation.