My WebLink
|
Help
|
About
|
Sign Out
Home
Browse
Search
February 2018
sbend
>
Public
>
Historic Preservation
>
Meeting Minutes and Recordings
>
HPC Meeting Minutes 2018
>
February 2018
Metadata
Thumbnails
Annotations
Entry Properties
Last modified
1/11/2019 6:18:39 PM
Creation date
6/8/2020 10:18:43 AM
Metadata
Fields
Template:
South Bend HPC
HPC Document Type
Minutes
BOLT Control Number
1001404
There are no annotations on this page.
Document management portal powered by Laserfiche WebLink 9 © 1998-2015
Laserfiche.
All rights reserved.
/
37
PDF
Print
Pages to print
Enter page numbers and/or page ranges separated by commas. For example, 1,3,5-12.
After downloading, print the document using a PDF reader (e.g. Adobe Reader).
Show annotations
View images
View plain text
side entry. There is a corbelled brick chimney. A two car, two door garage is at the rear in an angled placement to accommodate <br />the tapered lot site. <br />ALTERATIONS: The 1960 Sanborn map indicates that the angled garage at the rear of the property had yet to be added. 41 <br />Scrutinizing the manufacture of some of the existing casement windows indicates their installation sometime during the 1950s. <br />CoA 1994-0516 approved the repointing of the masonry mortar and the replacement of broken bricks. CoA 2009-0518 approved <br />the tear -off and re -roof of the asphalt -shingled roof. <br />APPLICATION ITEMS: "Remove & replace windows." <br />DESCRIPTION OF PROPOSED PROJECT: Applicant seeks retroactive approval for the removal and replacement of <br />nineteen (19) of the twenty-five (25) windows on the house, as well as to replace the driveway side exterior entry door and storm <br />door nearest to the garage. Reasons for doing so include the inoperable nature of some of the windows, privacy concerns in a <br />bathroom, and security concerns. <br />The application can be divided into three components: <br />1. Replacement of sixteen (16) windows with Marvin Ultimate Casement metal -clad wood windows with divided <br />light. The street face / West elevation has the following distribution: a four -unit casement on the ground floor, a three - <br />unit casement on the second floor, and a two -unit casement on the second floor. The driveway / South elevation has <br />the following distribution: a single -unit casement and a two -unit casement unit on the ground floor on either side of the <br />side -entry door, and a two -unit casement on the second floor. The South East elevation has a two -unit casement on the <br />ground floor, a two -unit casement on the second floor, and a single unit casement on the second floor abutting the <br />garage roof. On the second floor of the East face of the garage there is a two -unit casement window. The North East <br />elevation has a four -unit casement and two (2) two -unit casements on either side of the fire place on the ground floor, <br />and two (2) two -unit casements and a single -unit casement on the second floor, as well as a single -unit casement on the <br />ground floor of the garage. The windows being replaced are not original to the house, and have no divisions. <br />2. Replacement of three (3) windows with glass block. These three windows are obscured from the street and are being <br />blocked -up for security or privacy reasons. Two of the windows on the garage had interior security bars installed and <br />were inoperable. One of these windows is on the ground floor of the east face of the garage and is partly obscured by <br />bushes, while the second is on the north east face of the garage. The third window is on the second floor of the <br />driveway / South elevation and is part of a bathroom, and the request to install glass block is for security or privacy <br />reasons. <br />3. Replacement of the side entry door and storm door with new construction Therma Tru fiberglass -clad wood - <br />and -insulation door and a Larson wooden storm door, respectively. The current door has 12 glass panels (3 x 4) <br />above and a single decorative wood panel below, and is possibly original to the house. The current storm door insert <br />has four horizontal divisions in a 3/4 lite door. The replacement door appears to be a Therma-Tru Smooth -Star® <br />Craftsman Lite 2 Panel Shaker Flush -Glazed (Style No. S4814XC-SDLF1). Therma-Tru's website offers models that <br />are more in keeping with the existent door (for example, Smooth -Star® 3/4 Lite 1 Panel Flush -Glazed, Style No. S2250- <br />SDL). <br />Multiple windows are not being replaced. These include a "circle top" on the street face, a basement window and an original <br />window in the attic near the top of the gable wall on the driveway / South side, a glass block window on the South East side <br />abutting the garage, and two basement windows on the North East side. <br />Additional information and photographs are attached. <br />PRESERVATION SPECIALIST REPORT: <br />January 15, 2018 <br />RE: 1203 E Wayne St South <br />On January 11, I was asked to go to the address located at 1203 E Wayne St South. This property is located in the East <br />Wayne Local Historic District. The contractor, J.D. Holm Construction, had come in to the building department to obtain <br />permits, and was unaware that the house required an approved COA in order to have permits pulled that pertained to the exterior. <br />He had already begun work and had replaced several windows already. <br />I met with Terry Holm (contractor), and Ms. Phillips who is the owner of the house at the property. I saw four styles <br />and construction of windows on the house. The peaks on the third floor retain the original steel casement windows. The second <br />floor were metal construction and were single pane casement with scissor type lever type openers. The main floor had a rounded <br />top metal construction window (this will remain), new Marvin aluminum -clad wood windows, and glass block windows in the <br />garage area. A non -original steel casement is in the garage/breezeway addition between the house and what was the original <br />stand-alone garage. <br />The second generation windows are Qualitybilt Woodwork / Farley & Loetscher Mfg. Co. There are no brand <br />identifiers on the original windows that I could find. 1 was able to fmd a catalog online and found these windows were in <br />production from 1950 to 1960 and are metal filled with wood by-product, (sawdust and glue). Many of these windows do not <br />close entirely anymore. My photographs will show that several are not fully closed as the owner explained that they have to push <br />M <br />
The URL can be used to link to this page
Your browser does not support the video tag.