Opening of Quotes - Hydrant Flow Testing Project No 119-041R - M.E. Simpson Company Inc

Home Browse Search

M.E. Simpson Co., Inc. I Fire Hydrant Flow/Watermain Capacity Testing r ra Page 5 Information collected by M.E. Simpson Co., Inc. during the program and any other information provided by the Utility shall be regarded as CONFIDENTIAL and will not be shared without permission from the Utility or unless required by law. Develop a Flow Testing log of activity to be included with the final report that will include the following; 1. Type of problems observed 2. Location of same for problems discovered 3. Total estimated water used (to be included on each flow test result) 4. Mapping errors on the water atlas Prepare the final report at the completion of the project which will include all Fire Hydrant Flow/Watermain Capacity Testing reports, other problems found in the system during the course of flow testing that need the attention of the Water Utility. This final report shall be made available for submission to the Water Department within thirty 30) mwork daysofthe completion of the fieldwork. Assumptions & Services Provided by the Utility The Utility will furnish, in an electronic format, all maps, atlases, (two copies) and records necessary to properly conduct the flow testing program. The Utility will make available, on a reasonable but periodic basis, certain personnel with a working knowledge of the water system who may be helpful with general information about the water system. This person will not need to assist the Project Team on a full-time basis, but only on an "as needed" basis. The Utility will supply information regarding pressure zone boundary valves, and any other information that may make the job of flow testing easier to perform. The Utility will assist, if needed, to help gain entry into sites that may be difficult to enter due to security issues or other concerns. Equipment 0 be Used The following equipment will be used for fire hydrant operation and maintenance work during the unidirectional flushing program for the Utility. All materials listed will be on the job site at all times. Pumper Port Diffuser, Hose Monster 2.5" Port diffusers, Hose Monster / Pollards Certified and field tested flow gauges Valve keys FCS S30 or Gutermann AquaScope listening device to ensure the hydrant isn't leaking All necessary hand tools Truck mounted Arrow Board/Signage, and warning lights on trucks Traffic control equipment, including properly sized traffic cones with reflective stripes, when needed or required A "Schonstedt"/"Chicago Tape"/"Fisher" magnetic locators A "Radio Detection line locators