Change Order No 1 - Bendix Theater Lift at Century Center Proj No 118-036C - Brown and Brown General Contractors

Home Browse Search

ADA Lift at Century Center Project changes explanation 5-17-19 Item 1 The existing corridor ceiling elevation is lower than JPR had documented. Therefore, the area of ceiling above the lift needed to be raised to maintain the minimum required ceiling height of 7'-6". This was a field discovery during construction. Item 2 The cut opening for the lift is shown on the design to receive re used brick (from the cut opening) as the new door way returns toothed in. This will be changed to metal stud and painted gyp board with corner guards. This will result in a credit to be used on the other field discovery related changes. Item 3 The 4-layer existing wall that the opening is cut into between the stage and corridor does not have all 4 layers go up to the existing ceiling as shown on the drawings. Therefore, our designed lintel can be smaller. The contractor has provided a lintel that will result in a credit to be used on the other field related changes Item 4 The lintel shown in the drawings above the door to the lift on the corridor side will not work with an angle. It interferes with the required lift clearance. This angle will be changed to a 3/8" thick 3 %" wide plate that needs to have 4" bearing on each end so if opening is 43.25" the plate shall be 51.25" long (field verify) This is not an add or deduct. Item 5 The pilaster shown on the construction drawings is in a different location than in the field. This will require more CMU ground face block than originally bid and supplied. Item 6 Due to the field discovery related changes the opening cut in the existing wall remained open longer than anticipated. In order for the Century Center events to continue to take place the Scott from the Century Center requested a temporary wall be erected until the opening could be closed off with the project scope. Item 7 Due to items 1 and 3 the existing brick wall at corridor and stage had to be extended upward next to the new ceiling opening. Item 8 (if needed) The original project scope had the ceiling in the corridor as well as the can lights and sprinkler heads remaining in their existing positions. Due to item 1 the sprinkler head moving up in this area can no longer provide the required coverage in the newly created alcove at the top of the lift platform so a new head will need to be added.