Laserfiche WebLink
H d uH ii by Vlll A J 0 r6 s SHALL DE <br />AS <br />TYPE DESCRIPTION SPECIFIED <br />(Circle One) <br />of 80,000 to 1,000,000 pounds. <br />The cylinder tubing shall be D.O.M. Tubing, drawn over a <br />mandrel, and shall have tensile strength of 70,000 pounds. The tube <br />shall have a surface harness of 80 Rockwell "B". <br />The cylinder shall dismantle easily and overlap between stages for <br />greater stability. <br />The trunnion collar shall be oscillation <br />Each rod or pin eye shall have a zerk. <br />Ladder: <br />There shall be a fold up stainless ladder located at the driver side <br />(YES" ,/ NO <br />front corner of the body for easy entrance to the dump body. In <br />addition there shall also be a welded stainless step type insert on the <br />ftont driver's side on the inside of the body. <br />D-Rings: <br />Bed shall have 3 D-Rings on each side of bed to mount leaf box. <br />YES ) NO <br />The D rings shall be mounted in approved location and place as <br />what the City currently has on their fleet trucks. <br />Tarp Rods: <br />There shall be 2" wide stainless grip strut walk rails located on the <br />YES Y NO <br />sides of the body. Tarp rods shall be installed in approved location <br />and place as what the City currently has on their fleet trucks. <br />Tarp: <br />Tarp system should be of the same system that is presently used by <br />ell .. . ......... <br />YES"y NO <br />the City now and shall be installed in a like manor. System shall be <br />tt <br />a Pull Tarp system with parts that interchange with City's existing <br />traps, <br />Mounfing_2f Dump Body <br />Shall have a minimum of three (3) brackets (each side) - 2"x 4" flat iron minimum, at least one at rear, <br />one in center, one at front. Shall be welded at rear and bolted with three (3) 5/8" bolts per bracket <br />(minimum). Hoist cylinder shall be hooked to central hydraulics with 3/4" high pressure hose (two <br />wire minimum). Floor of body to be approximately 54" off ground +/- 2". All welding to be done at <br />factory on box. Other welding to be certified. Two rear hooks shall be supplied and bolted to rear of <br />frame. LED lights. <br />18 <br />