11275-26 Amendment 8 - Amending Chapter 21 of the South Bend Municipal Code to Make Miscellaneous Changes for Clarification and Consistency to Simplify Development Process and to Achieve Higher Quality Development

Home Browse Search

SECTION II. Chapter 21, Zoning, of the South Bend Municipal Code,Article 2 Definitions & Measurements, Section 21-02.03 Measurements, subsection (d) Building Form is hereby amended as follows: (2) Building Height(Stories). (D) A single one-story shared amenity space per on a Stacked Flats, Shop, or Mid-Rise/Tower building type shall not count as a story toward the maximum number if it meets the following criteria: SECTION III. Chapter 21, Zoning, of the South Bend Municipal Code,Article 2 Definitions & Measurements, Section 21-02.03 Measurements, subsection (e) Building Components,Ancillary Dwelling Height Allowance - No Alley diagram are hereby deleted and replaced with new Ancillary Dwelling Height Allowance - No Alley diagram as follows: Ancollary AoxWary Dweumg Rear vie Dwelling Rear Lot Lone 26 26' max max CC Accessory ucture /4/1". Structure y Fes. 18 TeX \ � max • diary Dwelling Height Allowance-No Alley Ancillary Dweiung Height Allowance-No Alley SECTION IV. Chapter 21, Zoning, of the South Bend Municipal Code,Article 2 Definitions & Measurements, Section 21-02.03 Measurements, subsection (f) Building Standards, (2) Building Width is hereby amended as follows: (A) For the Stacked Flats, Shop, and Mid-Rise/Tower building types, the Zoning Administrator may grant the following allowances if the building design meets the intent of the ordinance: i. Elevated hallway connections between structures that are set back at least 2n f et f en the faint r f cade shall not c nt toward „tinuity f building width If buildings or parts of a building are connected by an elevated hallway (open at the ground floor), the width of each building or part of a building shall be measured independently. The connection, which shall not count toward building width, shall be set back a minimum of 20 feet from the front or corner facade. ii. In a U3 or OF district, if buildings or parts of a building are at least four stories in height and connected by a hallway, the width of each building or part of a building shall be measured independently. The connection., which shall not count toward building width, shall be set back a minimum of 20 feet from the front or corner facade and may be at grade or elevated.