Laserfiche WebLink
<br />Revised: April-2017 PDS 09-1320 Page 1 of 4 <br />Product Data Sheet <br />MULE-HIDE STANDARD REINFORCED AND <br />FR REINFORCED EPDM MEMBRANE <br /> <br />PRODUCT DESCRIPTION <br /> <br />Mule-Hide Standard Reinforced EPDM is a high performance, <br />polyester reinforced membrane that stands up to tearing, <br />impacts, punctures and normal roof traffic. The elastomeric <br />properties of the EPDM membrane compensate for thermal <br />shock and building movement. EPDM membranes provide <br />excellent resistance to ozone and aging. The membrane is <br />manufactured in accordance with the guidelines established by <br />the RMA (Rubber Manufacturers Association) and meets or <br />exceeds the ASTM Standard Specification D 4637, Type II. Also <br />available as a Fire retardant (FR) membrane that is specially <br />formulated to inhibit spread of flame and meet or exceed code <br />body testing criteria for fire retardant roofing membranes. <br /> <br />Mule-Hide STANDARD REINFORCED and FR REINFORCED EPDM membranes are available with in-seam <br />tape that is pre-applied to the sheet. See below for sizes available. <br /> <br />BASIC USES <br /> <br />The Standard Reinforced and FR Reinforced EPDM membrane is used in mechanically attached and fully <br />adhered roofing systems in new construction, reroofing and recover (retrofit) applications. It may also be used as <br />flexible membrane flashings for walls, curbs, etc, when installing an EPDM membrane roofing systems. The <br />system must be installed over acceptable roof insulation or other suitable substrate. See the Mule-Hide EPDM <br />Specifications Manual for complete specifications and details. <br /> <br />SPECIFICATIONS <br /> <br />Physical Properties* Test Method SPEC. (Pass) Typical Standard <br />Tolerance on Nominal Thickness, % ASTM D 751 + 10 + 10 <br />Thickness Over Scrim, min, in.(mm) <br /> .045 <br /> .060 <br /> .075 <br />ASTM D 4637 <br />Annex <br /> <br />0.015 (0.381) <br /> <br /> <br />0.016 (0.406) <br />0.020 (0.508) <br />0.032 (0.810) <br />Weight, lbm/ft2 (kg/m2) <br /> .045 <br /> .060 <br /> .075 <br /> <br /> <br />0.27 (1.3) <br />0.39 (1.9) <br />0.48 (2.3) <br />Elongation, Ultimate, min, % <br /> .045 & .060 <br /> .075 <br />ASTM D 412 <br />Die C <br /> <br />250** <br /> <br />480*** <br />500*** <br />Tear Strength min, lbf (N) <br /> .045, .060 & .075 <br />ASTM D 751 <br />B Tongue Tear <br /> <br />10 (45) <br /> <br />70 (311) <br />Breaking Strength, min, lbf(N) <br /> .045, .060 <br /> .075 <br />ASTM D 751 <br />(Grab Method) 90(400) <br /> <br />140(623) <br />177 (787) <br />Factory Seam Strength, min. ASTM D 816 <br />(Modified) <br />Membrane <br />Rupture <br />Membrane <br />Rupture <br />Brittleness point, max, deg.F (deg.C)* ASTM D 2137 -49(-45) -49(-45) <br />Resistance to Heat Aging* <br /> Properties after 4 weeks @ 240oF(116oC) <br /> Breaking Strength, min, lbf(N) <br /> Elongation, Ultimate, min, % <br /> Linear Dimensional Change, max, % <br />ASTM D 573 <br /> <br />ASTM D 751 <br />ASTM D 412 Die C <br />ASTM D 1204 <br /> <br /> <br />80(355) <br />200** <br />+ 1.0 <br /> <br /> <br />182 (823) <br />250** <br />-1.0