Laserfiche WebLink
EonMobii <br />rN <br />emiAcal <br />ExxonMobilTm HDPE HD 6605.70 <br />High Density Polyethylene Copolymer Resin <br />Product Description <br />HD 6605.70 is a narrow molecular weight hexene copolymer designed for a wide range of injection molding applications, offering excellent <br />ESCR with good stiffness -toughness balance. Ideally suited for articles requiring rugged physical performance in cold temperature <br />environments. <br />General <br />Availability 1 <br />Latin America <br />North America • South America <br />Additive <br />Anti -gas fading: Yes <br />Applications <br />Automotive Components <br />Recreational Vehicle - <br />• Industrial Closures <br />Components <br />• Waste Carts <br />Revision Date • March 2013 <br />Resin Properties <br />Typical Value (English) <br />Typical Value (SI) <br />Test Based On <br />Density <br />0.948 g/cma <br />0.948 g/cma <br />ASTM D4883 <br />Melt Index (190'C/2.16 kg) <br />5.0 g/10 min <br />5.0 g/10 min <br />ASTM D1238 <br />Thermal <br />Typical Value (English) <br />Typical Value (SI) <br />Test Based On <br />Deflection Temperature Under Load <br />156 'F <br />69 •C <br />ASTM D648 <br />(DTUL) at 66psi - Unannealed <br />Deflection Temperature Under Load <br />108 'F <br />42 •C <br />ASTM D648B <br />(DTUL) at 264psi - Unannealed <br />Peak Melting Temperature <br />266 'F <br />130 °C <br />ASTM D3418 <br />Molded Properties <br />Typical Value (English) <br />Typical Value (SI) <br />Test Based On <br />Tensile Strength at Yield <br />3400 psi <br />23 MPa <br />ASTM D638 <br />Elongation at Break <br />1000 % <br />1000 % <br />ASTM D638 <br />Flexural Modulus <br />ASTM D790B <br />1%Secant <br />160000 psi <br />1100 MPa <br />2% Secant <br />140000 psi <br />970 MPa <br />Environmental Stress -Crack Resistance <br />ASTM D1693B <br />10% igepai, F50 <br />20 hr <br />20 hr <br />Impact <br />Typical Value (English) <br />Typical Value (SI) <br />Test Based On <br />Notched Izod Impact (-40•F (-40'C)) 1.0 ft-lb/in 55 J/m ASTM D256 <br />Additional Information <br />• Properties are based on compression molded samples. <br />• Test procedures may be modified to accommodate operating conditions or facility limitations. <br />• Tensile Strength at Yield and Elongation at Break tested using ASTM D638 Type IV, 50 mm/min. <br />Typical properties: these are not to be construed as specifications <br />*2013 Exxon Mobil. Exxon MON. the Exxort4obit logo- the interlocking -k' device and other product or service names used herein are Irademarks of Exxon Mobil, <br />unless indkated otherwise. This document may not be dislribuled, displayed, copied or altered without Exxon Mobil's prior written authorization, To the extent <br />Exxon Mobil aulhoflzes disltlbuthrg, displaying and/or copying of this docuirtenI, the user may do so only If the document Is unaltered and complete, including all of its <br />headers, footers, disclaimers and other information. You may not copy this document to or reproduce it in whole or in part on a website, Exxon Mobil does not <br />guarantee the typical for other) values. Any data included herein Is based upon analysis of representative samples and not the aotuat product shipped. The <br />informatan In this doeumen f relates only to the named product or materials when not in combination with any other product or materials. We based the information an <br />data beffeved to be reliable on the date compiled, but we do not represent. warrant, or otherwise guarantee, expressly orrmpltedly, the march antabdlty, fitness fora <br />particular purpose, freedom from patent infringement, suitability, accuracy, reliability, or completeness of Ibis information or the products, materials or processes <br />described. The user is solely responsible for all determinations regarding any use of material or product and any process in its territories of inlerest V* expressly <br />disclaim liability for any loss, damage or injury directly or indirectly suffered or Incurred as a rasutt of or refaled to anyone using ar retying on any of the information in <br />this document. This document is not an endorsement of any non -Exxon Mobil product or process. and we expressly disclaim any contrary rmplical an. The Wrrr* 'we," <br />"Our.' •ExxonMobll Chem IW' and "Exxon Mobil" are each used for comm niance, and may Ind ude any one or more of Exxon Mobil Chemical Company, Exxon Mobil <br />Corporation, or any affiliate either directly or indirectly stewarded. <br />Oo ,J..d datasheets at Wednesday. May 09, 2013 - Page: i or 2 <br />