Bid Opening - Refuse & Yard Waste Bins - Toter LLC

Home Browse Search

polyethylene Hexene Copolymer LLDPE Rotational Molding Resin Availability polyethylene resins are available in bulk hopper cars, hopper trucks, boxes, sea bulk containers, or agse product type and batch number are clearly marked on each container. Contact the sales office nearest you for availability in your area. Storage/Handling resin should be stored in a clean, dry place at ambient temperatures. Prolonged or improper storage can result in deterioration of product properties. Care should be taken when handling and transferring product to prevent foreign matter contamination. The Safety Data Sheet (SDS) contains important safety information and should be reviewed before using the pro uc . Processing Conditions Comprehensive assistance with processing conditions and technology is available from Technical Service at Food Packaging Status United States: resin complies with the specifications contained in the U.S. Food and Drug Administration (FDA) regulation 21 CFR 177.1520 for olefin polymers, para. (c) 3.2a, and may thus be used in the United States as an article or component of an article intended for use in contact with food. This resin is subject to the specific limitations that it may contact food only in articles having a volume of at least 18.9 L (5 gal. U.S.) only at temperatures below 212°F, and may not be used to hold ready -prepared foods intended to be reheated in the container at time of use (21 CFR 176.170(c) Table 2. conditions of use C—G). Other Countries: For regulatory compliance information for other countries, please contact your nearest office. resin is Certified by NSF to NSF/ANSI Standards #24, #51, and #61. In addition: e pro uc on aci i y is audited annually to assure that only authorized materials are used in the product; quality assurance and quality control procedures are followed in fabrication, and all the requirements of the standard continue to be met; products are sampled and retested on schedule; and labeling and product literature are true and accurate with respect to the NSF listed products. Environmental polyethylene resins are biologically and chemically inert, but improper disposal may present an ingestion hazard to wildlife. Where recycling of polyethylene resins is not possible, disposal to landfill or incineration in accordance with all applicable governmen aws an regulations is recommended. Please contact Technical Service for further information on recycling and disposal of resins. %_- is the SPI resin code developed for low density and linear NSF has listed �,._N low density polyethylene to identify material type for conformity with ANSI/NSF Standards 24, 51 LDPE sorting and recycling purposes. and 61.