Opening of Quotations - EVSE Installation Proj No 124-052 - Barnes Concepts

Home Browse Search

material in accordance with INDOT Standard Specifications section 621. The contractor is responsible for watering for thirty (30) days after placement of the seed. The cost of seeding and watering will not be paid for separately but shall be included in the cost of the concrete sidewalk. 3. Removal of existing sidewalks, curb ramps and detectable warning surfaces shall include the removal of all sidewalk, curb, curb ramps, detectable warning surface, grass, subgrade, and any other materials within the areas designated for new sidewalk and curb ramps in the plans. This removal shall be incidental to the cost of installation. 4. Removal of parking bumpers, if applicable, will not be paid directly but shall be included in the cost of the concrete sidewalk. 5. Precise removal limits shall be coordinated with the City. The cost of hauling of materials offsite shall not be paid for separately but included in the cost of Concrete Sidewalk and Curb Ramp construction. 6. Concrete or other items outside the removal limits damaged by the Contractor or any subcontractors during the removal process will be repaired or replaced to the satisfaction of the Engineer at no additional cost. 7. Saw cuts required for removal shall not be paid for separately but included in the cost of the Concrete Sidewalk installation. 8. Payment shall be made at the Unit Price as specified in the proposal as follows: SIDEWALK. CONCRETE. 4 in. SYD XXIV. PAVEMENT MARKINGS, SIGNAGE, AND CONCRETE BOLLARDS A. Prevailing Specifications: 2022, INDOT Standard Specification Section 808 City of South Bend Construction Standards and Specifications Section 6-5 B. Additions 1. Work to be performed shall include furnishing all labor, services, materials, insurance and equipment to apply pavement markings as shown in the plans. 2. The 4" green parking space markings shall be traffic paint and the EVSE pavement symbol shall be thermoplastic as specified in section 6-5 of the City of South Bend's Construction Standards and Specification. The EVSE Pavement Marking Symbol should be a 48" square. 3. Thermoplastic markings shall be applied in molten form by conventional extrusion when the pavement and ambient air temperature are minimum of 50 degrees Fahrenheit and rising, or by ribbon type extrusion or spray when the pavement and ambient air temperatures are a minimum of 50 degrees Fahrenheit and rising. Heat bonded preformed thermoplastic may be used for transverse or message markings. 4. The material shall be warranted to retain its color and adherence to the pavement for 180 days from substantial completion. 5. All pavement markings shall be in accordance with the Indiana MUTCD. 6. Longitudinal and transverse pavement markings will be measured by the linear foot of each type, color, and thickness properly installed. 7. Pavement markings will be paid at the contract unit price. 8. Signage to be provided by the City. Contractor to acquire posts and hardware for signage installation. 9. Bollards shall be a 5' long, 5" diameter steel pipe. The bollard will have 3' exposed and 2' buried in concrete, and the pipe will be filled with concrete. The bollard shall be painted to match the striping color. 10. The conversion of the existing parking spaces to the electric vehicle parking spaces as schematically designed in Attachment 1 will require some of the existing lines to be ground off. This cost will be incidental to the cost of striping for each division. Where new lines coincide with old lines, new lines may be placed on top of old lines. Removal of existing lines is not paid directly but shall be incidental to the pavement striping line item. 11. Payment shall be made at the Unit Price as specified in the proposal as follows: PAVEMENT STRIPING, 4" GREEN, THERMOPLASTIC EA PAVEMENT STRIPING, EVSE SYMBOL, THERMOPLASTIC EA SIGNAGE INSTALLATION (sign provided by the City) EA Version 3/15/2024 Page - 8 Public Works Quote