Laserfiche WebLink
SECTION 3 – STORMWATER <br />32 <br />3-3.2 (d) (vi) END SECTION <br />End Sections shall conform to INDOT Standard Specifications Sections 715.02, 908.06 for metal pipe <br />end sections, and 905.06 for precast concrete end sections. <br />3-3.2 (d) (vii) SLOTTED DRAIN <br />Slotted drains shall only be installed upon the prior approval of the City Engineer and shall be designed <br />and constructed in accordance with Indiana Design Manual Section 203-4.04(10) and INDOT <br />Standard Specifications Section 908.14, respectively. <br />3-3.2 (d) (viii) HEAD WALL <br />Headwalls shall be designed in accordance with Indiana Design Manual Section 203-2.06(1). <br />3-3.3 CONSTRUCTION METHODS <br />3-3.3 (a) GENERAL <br />Schedule for all work shall be provided and coordinated with the City Engineer. <br />All sewer system component installations are subject to inspection by the Project Representative <br />and civil authorities having jurisdiction. <br />3-3.3 (b) SHUT DOWN OF EXISTING PIPES <br />3-3.3 (b) (i) GENERAL <br />Provide for the flow of stormwater around the manhole and section, or sections, of pipe designated <br />for storm pipe installation or replacement, storm manhole installation or replacement, CIPP <br />rehabilitation, manhole structural rehabilitation, and manhole non-structural lining. The bypass <br />shall be made by plugging the line at an existing upstream manhole and pumping the flow into a <br />downstream manhole. The pump and bypass lines where applied shall be of adequate capacity and <br />size to handle the flow and submitted by a Professional Engineer registered in the State of Indiana. <br />If the bypass flow is being discharged to a different existing sewer network, the design engineer <br />shall also provide information showing that the sewer network has sufficient capacity for the <br />additional flow. Bypass to a different sewer network must be approved by the City Engineer. <br />3-3.3 (c) EXCAVATION <br />3-3.3 (c) (i) GENERAL <br />Excavation shall comply with INDOT Standard Specifications Section 203.