Opening of Quotes - Northwest Elevated Tank Valve Vault Coating Proj No. 122-018B - Jetco, Ltd.

Home Browse Search

Version 9/29/2021 Page - 5 Public Works Quote 1. The Contractor shall verify the locations of all utilities by contacting Indiana811 by calling 811 (in Indiana) or 1-800-382-5544 (outside of Indiana), or via www.indiana811.org, at least two (2) working days, not counting Saturdays, Sundays or federal and state holidays before proceeding with construction. It shall also be the Contractor’s responsibility to contact any other utility that is not contacted by Indiana811 and verify the utility locations. 2. The Contractor shall be responsible for working with the other utilities, i.e., gas electric, telephone, etc. in order to assure that all utilities that need to be replaced or relocated can be done with a minimum disturbance to service. The Contractor shall also be responsible for coordinating schedules with the various utilities such that they can proceed with their relocation work as efficiently as possible. 3. If the odor of natural gas is detected in a work area at any time during the course of work, the Contractor shall immediately notify NIPSCO at 1-800-634-3524. The Contractor shall also immediately notify the residents of adjacent properties. The Contractor shall advise the residents to evacuate their homes immediately if the odor is present within the dwelling. 4. Restoration of sprinkler systems damaged by the Contractor's operations shall be repaired by the Contractor at no additional cost to the City or the Owner of the system. XVI. DESCRIPTION OF WORK A. Prevailing Specifications: None B. Additions 1. Work to be performed shall include furnishing all labor, services, materials, insurance and equipment to provide and install new valve coatings for the Northwest Elevated Storage Tank as well as minor site improvements according to the intent of the plans and specifications. 2. The Contractor shall preserve and protect all surrounding property, structures, tenants, visitors and their property from damage caused by the Contractor’s operations. 3. Miscellaneous Repair Items: a. Coordinate replacement of the FAA Light Bulb on the top of the tank with the OWNER supplied bulb. b. Coordinate the repair or replacement of the valve vault’s broken hinge with the OWNER. XVII. INSULATIVE PIPE COATINGS A. Prevailing Specifications: None B. Additions 1. Weather: a. Apply coating materials per manufacturer’s printed data sheet instructions. b. Prepare surfaces and apply and cure coatings within air and surface temperature ranges in accordance with manufacturer’s recommendations. c. Refer to specific product data sheets for minimum surface temperature requirements. d. Prepare surfaces and apply and cure coatings within relative humidity range in accordance with manufacturer’s instructions. e. Do not prepare surfaces or apply coatings in rain, snow, fog, or mist. f. The CONTRACTOR shall provide ventilation during the coating evaporation stage in confined or enclosed areas in accordance with ANSI/AWWA D102-03. 2. The CONTRACTOR shall comply with all regulations as established by the Occupational Safety and Health Act (OSHA) and other government authorities have jurisdiction over such activities. Up to date Material Safety Data Sheets shall be available on site for all products stored or in use. It shall be the CONTRACTOR’s responsibility to adequately protect, shield or cover all structure, machinery, equipment and openings as required preventing damage or contamination from the work procedures. The work area shall be kept clean at all times. 3. Products: a. All materials delivered to the job site shall be in original, sealed and labeled containers of the protective coating manufacturer. b. Products for each specified system shall be of a single manufacturer. Only one manufacturer shall be used on the tank project. c. Manufacturers: (i) Tnemec Company Incorporated (Tnemec). (ii) Sherwin Williams.