Award Bid - 6000 More or Less, Universal Nestable Refuse and Yard Waste Containers - Otto Environmental Systems

Home Browse Search

PRODUCT SPECIFICATION LID: The Otto MSD-95M container Lid is injection -molded from HDPE and is attached to the container body using two (2) HDPE snap -lock hinge pins. The lid rotates freely about the hinge a full 270 degrees. The lid, when closed, rests on the top rim of the container body, providing a secure tight fit around the entire perimeter between the lid and base. This prevents rain, insects and vermin from entering the container, as well as preventing the escape of most odors when the lid is closed. The lid is molded with a hand -hold lip that extends across the full width of the front of the cart and wraps around both corners. This allows the lid to be easily opened from three sides without contact with refuse or residue. The minimum material thickness in the lid is 0 .120". The weight of the lid is 4.1 lbs. HINGE PIN: The Otto MSD-95M lid Hinge Pins are injection -molded from HDPE. The hinge pins secure the lid to the integrally molded lid hinge and handle detail. Two (2) hinge pins are used to secure the lid. The hinge pins are installed at the factory using a rubber mallet. At installation, the truncated conical end of the hinge pin compresses and snaps into the pocket detail in the handle detail. This prevents vandalism and securely fastens the lid to the container base. The hinge pins can be removed with a special tool available from Otto. LID HINGE AND HANDLE DETAIL: The Otto MSD-95M Lid Hinge is integrally molded to the container body. The handle's diameter is 1.0" and provides 1.375" clearance for gloved hands. /_I:1111:9 The Otto MSD-95M machined solid steel Axle has a 27/32" diameter. The axle is zinc plated to protect against rust and corrosion. The large diameter of the axle allows the container prevents bending which can cause wheel rub and supports a fully loaded container. The axle will withstand a 375-lb. load without permanent deformation. The weight of the axle is 3.9 lbs. WHEELS: REV 0412 PAGE 3 of 6 OTTO ENVIRONMENTAL SYSTEMS NORTH AMERICA, INC.