Award Bid - 6000 More or Less, Universal Nestable Refuse and Yard Waste Containers - Otto Environmental Systems

Home Browse Search

PRODUCT SPECIFICATION interior is free of crevices and recesses where refuse could become trapped, in order to allow complete emptying. The wall thickness is up to 0.19". The high -density polyethylene has a density of 0.945 to 0.954 grams cm3. The Melt Index (MI) of the HDPE is 3.5 to 6.0. The top of the container body is reinforced with a rim around its entire perimeter. This feature adds structure and stability to the container and provides a flat surface for the lid to close on. The top of the rim has a rain lip to prevent water from entering the container with the lid closed. The handles are integrally molded into the container body at the top rim. The underside of the rim on the Otto MSD-95M is reinforced with a total of forty (40) integrally molded -in gussets spaced around the entire circumference of the container. The front of the container has a molded recess that provides for the front "catch," or lower lift bar. The MSD-95M container is offered with a 1" rotating steel catch bar. The clip -style metal lower lift bar is freely rotating, 1" OD (outside diameter) roll -formed steel with formed ends for added strength. The wall thickness of this bar is .050", hot rolled steel with an iron zinc clear chromate top coat shielding for corrosion protection. The clip -style metal catch bar allows for speedy installation of the bar from the outside of the container without requiring the use of any hand tools. Metal spring clips are compressed during installation and spring back once inside the container for a solid stop once installed. The bottom of the container has molded -in wear ridges that extend around its perimeter. The wear ridges provide additional protection against abrasive wear if the container is slid on asphalt or pavement and improve impact resistance of the bottom of the container. There is a recessed area molded above the middle of the axle which allows a person's foot to be placed directly upon the axle to allow the container to be easily tilted, even with a full load. The inside bottom of the container has a spherically shaped energy absorbing detail, approximately 8" in diameter, integrally molded into its floor. This detail has been engineered to protect the floor of an empty container from impact when being loaded with heavy objects. The Otto MSD-95M rollout container has an integrally molded front "pouch" to facilitate semi -automated lifting. This upper pouch is reinforced with a pattern of eight (8) internal ribs. These ribs add strength and structure to the lifting pouch and front of the container. Otto containers are designed for nesting and easy stacking for shipment and storage. Stacking ribs are molded onto the top rim to prevent containers from becoming wedged together during shipment. The weight of the container body is 24.1 lbs. This weight does not include any other components. PAGE 2 of 6 OTTO ENVIRONMENTAL SYSTEMS NORTH AMERICA, INC.