Opening of Bids - One (1) or More, 2020 or Newer, Emergency Medical Vehicle – Spec P - Horton Emergency Vehicles

Home Browse Search

matching antimicrobial vinyl upholstery. It shall be mounted 10" away from main wall and 8.5" from the AC chute on linen cabinet. 22.3 CPR SEAT A CPR seat shall be installed on the street side of the patient compartment aft of the main action area counter. The CPR seat shall be KKK-A-1822 Change Notice 8 compliant with VALOR A-VAL shelf mount back frame and internal bolsters. The seat shall consist of a four (4) point/four (4) retractors single click internal mount belt system. The seat shall conform to all applicable FMVSS and SAE J3026 requirements. Documentation from a certified independent testing facility shall be required stating the seating configuration has passed SAE J3026 requirements and tested in accordance with SAE J2917, Occupant Restraint and Equipment Mounting Integrity — Frontal Impact System -Level Ambulance Patient Compartment and SAE J2956, Occupant Restraint and Equipment Mounting Integrity — Side Impact System - Level Ambulance Patient Compartment. The VALOR A-VAL shelf mount back frame and the seat shall be padded and covered with cushioned, color coordinated, cut and sewn vinyl. There shall be storage under the seat base. Y N 22.5 SQUAD BENCH A squad bench seat with two (2) individual seating positions and two (2) VALOR A- VAL, or equal, shelf mount back frames with internal bolsters will be installed on the curbside of the patient compartment. There shall be two (2) seat belts shall consist of four (4) point/four (4) retractors single click internal mount belt system. The squad bench seats shall be KKK-A-1822F Change Notice 8 compliant and conform to all applicable FMVSS and SAE J3026 requirements. Documentation from a certified independent testing facility shall be required stating the seating configuration has passed SAE J3026 requirements and tested in accordance with SAE J2917, Occupant Restraint and Equipment Mounting Integrity — Frontal Impact System -Level Ambulance Patient Compartment and SAE J2956, Occupant Restraint and Equipment Mounting Integrity — Side Impact System -Level Ambulance Patient Compartment. The VALOR A-VAL shelf mount back frames and the bench shall be padded and covered with cushioned, color coordinated, cut and sewn vinyl. A storage area shall be provided in the squad bench base under the lift up cushion. The squad bench base shall be constructed of .90" thick aluminum for maximum storage capacity and minimum weight. The interior of the squad bench shall be sprayed with sound absorbing polyurethane material. Y N 22.6 REINFORCED SAFETY NET A reinforced safety net shall be located at the head of the squad bench. The sharp/waste container shall be on tip out, door at head of bench facing the aisle and easily accessible from the front of the squad bench. The sharp/waste container size and placement shall match the Department's newest ambulance. Y N 22.7 OXYGEN BOTTLE STORAGE A single oxygen bottle storage system shall be provided and installed at the side of the ALS cabinet, in the bottom of the health center. It shall provide vertical storage