Opening of Bids - One (1) or More, 2020 or Newer, Emergency Medical Vehicle – Spec P - Fire Service, Inc.

Home Browse Search

City of South Bend Central Services Division Fire Service, Inc./Wheeled Coach Ambulance Specification PHOTO METRIC AND PHYSICAL REQUIREMENTS As specified by KKK-A-1822-F. All emergency light switches shall be labeled as specifi-ed in paragraph 3.7.11 of KKK -A- 1 822-F, and the primary/secondary mode switch(s) shall have an indicator light to show the driver which mode is activated. All warning light control switches, as described in section 4.3.1 of this document, shall be located in the driver control console and arranged to provide the warning signal modes and combinations as specified in Table 1 of KKK-A- 1822-F, page 19. An independent test-ing laboratory will certify that the system meets these requirements. Test documents to be included with this proposal. All Whelen clear lens and colored optic warning lights are provided as specified and located within the response stripper and layout drawings. CLEARANCE LIGHTS The primary manufacturer shall incorporate DOT marker lights at the highest point of the vehicle. The marker lights shall be visible 360 degrees. In addition, each corner marker light shall be recessed and visible 180 degrees. Also at each corner, the marker light lens cover shall be tilted upward on a 45 degree angle to be visible above the horizontal plane for 360 degrees. These measures will insure the vehicle will be visible in low light conditions with the headlights in the "on" position. Bolt on upper clearance lights or clearance lights within the support corner extrusions will not be acceptable. Amber lenses shall be installed on the front corners and Red lenses shall be installed on the rear corners. The light shall be LED and flash at high intensity when activated through a separate switch located on the cab console.. MARKER LIGHTS Three red clearance lights shall be installed on the rear roof rail. EXTERIOR FLOOD LIGHTS 10070-0003 11 /05/20 41