Laserfiche WebLink
City of South Bend Central Services Division <br />Fire Service, Inc./Wheeled Coach Ambulance <br />Specification <br />switch shall incorporate a LED indicator lamp and rated at 15 Amps continuous <br />service. The switch and rocker shall be of a thermo set molding material. The <br />complete switch assembly shall be designed to withstand one thousand (1,000) <br />volts RMS dielectric test. The switches shall have a positive "throw" feel and an <br />audible click upon activation and deactivation <br />The rocker switches, as described in section 4.1.3, shall have integrated label lens <br />area that is illuminated by two independent LEDs. The LED brightness shall be <br />controlled by the headlight rheostat. The label shall be white legends on black <br />poly carbonate background. <br />The OEM throttle monitor shall be mounted in the primary manufacturer's <br />console. It shall be mounted to be easily accessible to the driver. <br />WARNING INDICATORS <br />The electrical system shall incorporate a warning light panel in the driver's <br />console. It shall provide indicator lights for showing when a patient compartment <br />door(s), side and rear, are open. This shall be a flashing red LED light. There shall <br />be an exterior compartment "door open" warning light. This shall be a flashing <br />red LED light of the same size. <br />A battery indicator light shall be provided. It will be a green light located in the <br />warning light panel. It shall illuminate when the battery switch is in the "ON" <br />position. The light shall be steady burn to indicate the batteries have been <br />selected. <br />WIRING INSTALLATION <br />The ambulance body and accessory electrical equipment shall be served by <br />circuit(s) separate and distinct from the vehicle chassis circuits. Wiring methods <br />must conform to SAE J1292. All wiring provided by the primary manufacturer <br />10070-0003 11 /05/20 <br />31 <br />