Laserfiche WebLink
passenger side of the chassis cab and a driver side double step with an integrated <br />flip down battery cover and roll out battery tray. The covers shall be constructed of <br />.125" 3003 alloy aluminum diamond plate. There shall be a flip down step installed <br />on passenger side forward and above of the recessed double step. To provide for <br />increased road splash protection and ease of driver/technician entry and exit, fire <br />grade aluminum diamond plate with an open grate diamond back non-slip stepping <br />surface shall be installed on the chassis steps. <br /> <br /> <br /> Y___N___ <br /> <br /> <br />7.27 STONE GUARDS <br /> <br />The lower 21” of the front module wall shall have an aluminum diamond plate stone <br />guard TIG welded to ensure a secure fit. Stone guard shall not be screwed or pop <br />riveted. <br />The lower forward corners of the body shall have approximately 21" high aluminum <br />diamond plate rolled around the corner radius and terminate at the junction of the <br />cab and the body. <br />The lower rear corners of the body shall have approximately 16.5" high aluminum <br />diamond plate rolled around the corner radius and terminate at the rear kick plate <br />area. <br /> Y___N___ <br />7.28 FENDERETTES <br /> <br />Formed, rubber fenderettes shall be provided around each rear wheel well opening. <br />They shall help diminish damage to the wheel well area of the body caused by <br />stones and road debris. <br /> Y___N___ <br />7.29 LICENSE PLATE <br /> <br />A Cast Products model #LP0002-1 rear license plate holder (or equal) shall be <br />recessed into the rear of the body on the driver's side between the kick plate and <br />turn signal. It shall be constructed of polished cast aluminum and have two [2] LED <br />top lights to illuminate the plate. The bezel shall be mounted to the body with <br />stainless steel screws and include a .060” thick closed cell foam gasket to prevent <br />moisture from seeping behind the bezel. <br /> Y___N___ <br /> <br /> <br />8.0 INTERIOR PATIENT COMPARTMENT COMPONENTS <br /> <br />Patient Compartment Sound Levels: This vehicle shall provide an interior working <br />environment in which the ambient noise level is less than 80 dB as measured <br />according to AMD Standard 006, Sound Level Test Code for Ambulance <br />Compartment Interiors. <br />Patient Compartment Carbon Monoxide Levels: This vehicle shall provide an interior <br />working environment in which the carbon monoxide level is less than 10 ppm as <br />measured in accordance with AMD Standard 007, Carbon Monoxide Levels for <br />Ambulance Compartment Interiors. <br /> Y___N___ <br />8.1 CABINET GLASS <br /> <br />All cabinet doors incorporating acrylic glass, as sliding or hinged windows shall have