Laserfiche WebLink
Test Lab <br />AL ACC Climate Control, Inc. <br />AM D001 <br />4 of 43 <br />Issue Date: 080904 <br />Revision Date: 111011 <br />Initial: ;W AM D STANDARD 001 (REV F) <br />Date: 11/20/2013 Ambulance Body Structure Static Load Test <br />Procedures & Test Results - Roof Load <br />5.1 $11C While force application plate is suspended and level in the air zero all load cell meters. <br />5.2 $1111C With all the vehicle doors closed lower the force application plate until 500 lbs. registers on the <br />meters and take initial deflection measurements. <br />5.3 $4 Record elevation readings of all four corners of the roof, and on the three dial indicators. <br />5.4 14 Apply .75 x's (for Type II), and 1.25 x's (for Type I and Type III) the curb weight of the <br />completed ambulance to the roof structure. <br />5.5 04 Record elevation readings of all four corners of the roof, and on the three dial indicators. <br />5.6 Apply 1.5 x's (for type II), and 2.5 x's (for Type I and Type III) the curb weight of the completed <br />ambulance to the roof structure. <br />5.7 $4 Record elevation readings of all four corners of the roof, and on the three dial indicators. <br />58 With full load applied open and close all exit doors. <br />5.9 Check for any structural or component damage while load is applied. <br />5.10 Release load until only 500 lbs. remains. <br />5.11 Record elevation readings of all four corners of the roof, and on the three dial indicators. <br />Raise the force application plate sufficiently to work under. Block in place for added safety. <br />43Withload removed open and close all exit doors. <br />With load removed check for any structural or component damage. <br />7.1 Take pictures of test procedure for documentation. <br />Actual Load Applied <br />20,000 <br />40,000 <br />5.15 <br />Initial 500 lbs. <br />.75 x C.W. - TII <br />1.5 x C.W. - TII <br />Recovery 500 lbs. <br />1.25 x C.W. - TI, TIII <br />2.5 x C.W. - TI, TIII <br />Road Side Front Corner <br />97.44 <br />97 <br />-0.438 <br />96.56 <br />-0.875 <br />97.19 <br />-0.25 <br />Road Side Rear Corner <br />97.63 <br />97.44 <br />-0.188 <br />97.38 <br />-0.25 <br />97.56 <br />-0.063 <br />Curb Side Front Corner <br />97.93 <br />97.5 <br />-0.43 <br />97.56 <br />-0.368 <br />97.69 <br />-0.243 <br />Curb Side Rear Corner <br />97.93 <br />97.75 <br />-0.18 <br />97 <br />-0.93 <br />97.88 <br />-0.055 <br />Road Side Middle Module <br />0.27 <br />0.22 <br />-0.053 <br />0.36 <br />0.085 <br />0.29 <br />0.019 <br />Curb Side Middle Module <br />1 2.201 <br />0.43 <br />-1.771 <br />0.69 <br />-1.506 <br />0.24 <br />-1.96 <br />Interior Module (Ceiling) <br />11 <br />1.31 <br />0.31251 <br />1.75 <br />0.751 <br />1.19 <br />6.1875 <br />Automotive Climate Control • 22428 Elkhart East Blvd. • P.O. Box 1905 • Elkhart, IN 46515-1905 <br />P(574) 264-2190 • F(574) 266-6744 • sales@accclimatecontrol.com • www.accelimatecontrol.com <br />2013-017 AEV Raw Module AMD001-025 Test Forms <br />U:\AMDKKK-A-1822 <br />