Laserfiche WebLink
American Response Vehicles <br />that will not sacrifice the body integrity. <br />FRONT CORNER ICC LIGHTS: The front body corner caps will include DOT approved compliant light fixtures <br />with clear lenses. The lenses will house ICC fixtures that include amber LED's to be mounted to the front and <br />front corners. There will also be additional LED lights that alternate red and clear within the light to act as <br />additional warning lights. <br />FRONT ICC LIGHTS: Clearance lights will be provided per FMVSS 108. The lights will illuminate the height of <br />the vehicle, define the vehicle center line. Three (amber) lights will be provided on the front of the module <br />and be populated with at least two LEDs. <br />REAR CORNER ICC LIGHTS: The rear body corner caps will include DOT approved compliant light fixtures with <br />clear lenses. The lenses will house ICC fixtures that include red LED's to the rear and rear corners. There will <br />also be additional LED lights that alternate red and amber within the light to act as additional warning lights. <br />REAR ICC LIGHTS: Clearance lights will be provided per FMVSS 108. The lights will illuminate the height of the <br />vehicle and define the vehicle centerline. Three red lights will be provided on the rear of the module and be <br />populated with at least two LEDs. <br />CORNER CAP WARNING LIGHT SWITCHING: The above mentioned corner cap LED lights will be wired to <br />activate in Primary Only. <br />DOOR OPEN WARNING LED LIGHTS: There will be a Kinequip LED (light emitting diodes) light installed on each <br />compartment door interior panel. For double doors, the light will be installed on the exterior of the trailing <br />door. The fixture will measure 1" tall x 1.75" wide and will be installed to the ambulance with nylon isolators to <br />separate the stainless fasteners from the surface to eliminate electrolysis. The light will be a combination of red <br />and white with four individual LEDs. There will be two red and two white diodes which will alternate flash red <br />and white with an internal flasher within the light. The flange of the light will be chrome in color. The lights will <br />activate when the respective compartment door is opened to flash rearward to warn approaching traffic that <br />the compartment door is open. <br />SIDE MARKER LIGHTS: Two Whelen 700 series Tail/Stop LED type side marker light will be supplied and <br />installed on the apparatus body per FMVSS and DOT Standards. Each light will be wired with the running to <br />be the tail steady and the turn is to be the stop and flash. Each light will be populated with at least thirty <br />eight light emitting diodes. The lights will illuminate the end of the vehicle body. <br />TAILLIGHTS: Whelen 600 Series, Tail Lights <br />BRIGHT CHROME -LIKE FLANGES: The 600 series taillight group will be embellished by bright trim flanges. <br />STOP/TAILLIGHT: The stop/tail light fixtures on the rear of the body will be Whelen Brand series 600 Fully <br />Populated Light Emitting Diode. The lights will operate as both tail and stop modes and will be red when <br />illuminated. <br />25 <br />