Laserfiche WebLink
Liberty Tower Exterior Renovations - Ph 2 © Copyright, Kil Architecture / Planning <br />South Bend, Indiana September 2020 <br />B. Concrete and Masonry: Prior to priming, patch holes and indentations and fill cracks with <br />manufacturer's recommended crack repair material. <br />3.4 COATING APPLICATION <br />A. Apply coatings in accordance with manufacturer's instructions, to thicknesses specified. <br />B. Apply in uniform thickness coats, without runs, drips, pinholes, brush marks, or variations in <br />color, texture, or finish. Finish edges, crevices, corners, and other changes in dimension with <br />full coating thickness. <br />3.5 CLEANING <br />A. Collect waste material that could constitute a fire hazard, place in closed metal containers, and <br />remove daily from site. <br />B. Clean surfaces immediately of overspray, splatter, and excess material. <br />C. After coating has cured, clean and replace finish hardware, fixtures, and fittings previously <br />removed. <br />3.6 PROTECTION <br />A. Protect finished work from damage. <br />END OF SECTION <br />CONCRETE AND MASONRY 09 9723 - 4 <br />COATINGS <br />