Laserfiche WebLink
South Bend Fire Department <br />One (1)Bdy Trim, Entire Rr Bdy,Smooth for Chevron Stripe <br />44-01-4000 <br />REAR BODY PROTECTION PANELS <br />The rear body panels of the body shall be a smooth material, to allow for the properapplication <br />and installation of a "Chevron" stripe on the rear. <br />One (1)PolishedCompt Top Welds <br />44-01-5000 <br />POLISHED COMPARTMENT TOP WELDS <br />The compartment top welds to be polished. <br />One (1)Fuel Tank, RemovableAccess Panel <br />44-07-4200 <br />FUEL TANK ACCESS PANEL <br />There shall bearemovable panel in the rear compartment, used to gain access to the fuel tank <br />and fuel gauge-sendingunit. <br />One (1)Steps, Fldg,Rear, Right Hand (2), Integral LED Lts <br />33-62-4220 <br />FOLDING STEPS RIGHT SIDE REAR <br />Two (2) folding steps ofdie cast high-strength zinc/aluminum alloy, plated with a superior <br />automotive grade chrome finish shall be provided. The greater than 42 sq. in. serrated non-skid <br />step traction area also offers an oversized non-slip grasp hand-hold. A heavy duty stainless steel <br />spring design firmly holds the step in the open or closed positions. A rubber stop prevents any <br />transit noise and rattles in the closed position. Step lighting shall be from a LED light mounted <br />above the step. <br />The step has been third part tested to assureconformation of NFPA 1901 andFHA, 49CFR <br />specifications for stepping surfaces and handhold. <br />The steps shall be installed on the rear right side of the body. <br />One (1)Step, Bltd, Treadplate,RrIntermediate,48" <br />33-62-5300 <br />REAR INTERMEDIATE STEP <br />An intermediate fixed step shall be provided at the rear of the apparatus body, bolted in place and <br />easily removableforreplacement orrepair. The intermediate step shall beconstructed of .188” <br />polished aluminum diamond plate or equal non-slip surface in compliancewith NFPA #1901 <br />standards and be approximately 8” deep x 48” wide. <br />10040-001909/02/20 <br />83 <br />PDF created with pdfFactory Pro trial version www.pdffactory.com <br /> <br />