Opening of Bids - Seitz Park Reconstruction Phase I Proj No. 117-093A - Northern Indiana Construction Co., Inc.

Home Browse Search

SIDE ROLL PRO'1 EU I IVA The SRS system shall provide protection during a fast or slow 90 -degree roll to the side, in which the vehicle comes to rest on its side. The system shall analyze the vehicle's angle and rate of roll to determine the optimal activation of the advanced occupant restraints. The SRS system shall deploy the following components in the event of a side roll: Air curtains mounted in the outboard bolster of outboard seat backs. Suspension seats shall be retracted to the lowest travel position. QINO Seat belts shall be pre -tensioned to firmly hold the occupant in place. SEATING CAPACITY The seating capacity in the cab shall be four (4) DRIVER SEAT seat shall be provided in the cab for the driver. An adjustable high back suspension The seat shall include the following features incorporated into the side roll protection system. Side air curtain shall be mounted integral to the outboard bolster of the seat back. The air curtain shall be covered by a decorative panel when in the stowedposition. A suspension seat safety system shall be included. When activated in the event of a side roll, this system shall pretension the seat belt, then retract the seat to its lowest travel position. The seat shall be furnished with a three (3)-point, shoulder type seat belt. To provide quick, easy use for occupants wearing bunker gear, the seat belt shall have a minimum 120.00" shoulder length and 55.00" lap length. The scat belt tongue shall be stored at waist ton a position qE:S O for quick application by the seat occupant. The seat belt receptacle shall be provided cable conveniently nested next to the seat cushion, providing easy accessibility. The seat belt shall be furnished with dual automatic retractors that shall provide ease of operation in the normal seating position. OFFICER SEAT An adjustable seat shall beprovided in the cab for the passenger. The seat back shall be an SCBA back style with 7.50 degree fixed recline angle and shall include minimum 4.50" wide x 7.50" deep side bolster pads formaximum support. The SCBA cavity shall be adjustable from front to rear in 1.00" increments, to accommodate different sized SCBA cylinders. Moving the SCBA cavity shall be accomplished by unbolting, relocating, and re -bolting it in the desired location. The seat shall include the following features incorporated into the side roll protection system. Side air curtain shall be mounted integral to the outboard bolster of the seat back. The air curtain shall be covered by a decorativepanel when in the stowed position. A suspension seat safety system shall be included. When activated, this system shall pretension the seat belt and then retract the seat to its lowest travel position. The seat shall be furnished with a three (3 )-point, shoulder type seat belt. To provide quick, YES easy use for occupants wearing bunker gear, the seat belt shall have a minimum 120.00" shoulder length and 55.00" lap length. The seat belt tongue shall be stored at waist position for quick application by the seat occupant. The seat belt receptacle shall be provided on a cable convenient) nested next to the seat cushion, providing easy accessibility. The seat belt _....... 29