Laserfiche WebLink
12 VOLT LIGHTING <br />There will be two (2) Fire Research Spectra Max, Model SPA260-Q20, 12 volt LED surface mounted <br />scene light(s) with white bezel(s) provided (1) centered in the front of the cab (1) side near top of of <br />apparaturs. <br />The light(s) will be controlled in the following way: <br />• a switch at the driver's side switch panel <br />• a switch at the pump operator's panel <br />• no additional switch location <br />• no additional switch location <br />The light(s) may be load managed when the parking brake is applied. <br />DECK LIGHTS <br />There will be two (2) Whelen, Model PFBP12C, 12 volt DC LED floodlights with swivel mount provided <br />at the rear of the hose bed, one (1) each side. <br />The lights will be activated by a control from a switch at the rear of the truck. <br />WALKING SURFACE LIGHT <br />There will be Model FRP, 4" round black 12 volt DC LED floodlight(s) with bolt mount provided to <br />illuminate the entire designated walking surface on top of the body. <br />The light(s) will be activated when the body step lights are on. <br />WATER TANK <br />Booster tank will have a capacity of 500 gallons and be constructed of polypropylene plastic by United <br />Plastic Fabricating, Incorporated. <br />Tank joints and seams will be nitrogen welded inside and out. <br />Tank will be baffled in accordance with NFPA Bulletin 1901 requirements. <br />Baffles will have vent openings at both the top and bottom to permit movement of air and water <br />between compartments. <br />Longitudinal partitions will be constructed of .38" polypropylene plastic and will extend from the bottom <br />of the tank through the top cover to allow for positive welding. <br />Transverse partitions will extend from 4.00" off the bottom of the tank to the underside of the top cover. <br />All partitions will interlock and will be welded to the tank bottom and sides. <br />Tank top will be constructed of .50" polypropylene. It will be recessed .38" and will be welded to the <br />tank sides and the longitudinal partitions. <br />Tank top will be sufficiently supported to keep it rigid during fast filling conditions. <br />54 of 89 <br />